We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray DisplayPort 1.4 cable with braided jacket and gold male connectors, 3.3 ft long

ESTONE

ESTONE DP28 DisplayPort 1.4 cable 3.3 ft Gray

SKU CH-QZED-D0B7V

DisplayPort 1.4 cable delivers 32.4 Gbps bandwidth for 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz

  • TypeDisplayPort
  • ColorGray
  • Length3.3 ft.
  • Cable Length3.3 ft.
  • Connector Number1
  • Connect From1 x DisplayPort 1.4
  • Drives 8K at 60 Hz with 32.4 Gbps bandwidth
  • Delivers 4K at 144 Hz for smooth gaming motion
  • Supports 2K at 240 Hz for competitive play
  • Triple-layer shielding plus 28 AWG tinned copper ensures stable signals
  • 30 000-bend nylon jacket and gold-plated connectors resist wear

3.3 ft DisplayPort 1.4 cable for high-refresh

The ESTONE DP28 is a male-to-male DisplayPort 1.4 cable measuring 3.3 ft, finished in grey with a nylon-braided jacket. It targets PC builders and gamers who need a short, certified link between a graphics card and a monitor supporting up to 8K resolution. The 28 AWG tinned-copper conductors and triple shielding are built for stable signal delivery at high bandwidth.

Bandwidth ceiling and compression at length

DisplayPort 1.4 caps raw throughput at 32.4 Gbps using HBR3 signalling, so 8K at 60 Hz or 4K at 144 Hz require DSC 1.2 compression to fit inside that pipe. At 3.3 ft the cable meets the HBR3 eye-diagram requirements, but any longer run would risk link training failures at the top rates. Backward compatibility with DisplayPort 1.3 and 1.2 means older ports work, yet they cannot exceed their own lower bandwidth limits.

The single spec that decides fit

Maximum supported refresh rate at the target resolution is the deciding number: 8K at 60 Hz, 4K at 144 Hz, 2K at 240 Hz, or 1080p at 240 Hz. If the monitor and GPU combination demands a higher uncompressed bandwidth than 32.4 Gbps, this cable cannot carry the signal regardless of its build quality. Buyers needing uncompressed 8K above 60 Hz or 4K above 144 Hz without DSC must choose a different interface.

Highlights

  • Drives 8K at 60 Hz with 32.4 Gbps bandwidth
  • Delivers 4K at 144 Hz for smooth gaming motion
  • Supports 2K at 240 Hz for competitive play
  • Triple-layer shielding plus 28 AWG tinned copper ensures stable signals
  • 30 000-bend nylon jacket and gold-plated connectors resist wear

Specifications

BrandESTONE
ModelDP28
TypeDisplayPort
ColorGray
Length3.3 ft.
Cable Length3.3 ft.
Connector Number1
Connect From1 x DisplayPort 1.4
Connect To1 x DisplayPort 1.4
Connector DetailDisplayPort to DisplayPort( Male to Male)
Terminal GenderMale to Male
SpeedSupports up to 32.4Gbps bandwidth.
SpecificationsBandwidth: 32.4Gbps
Refresh Rate: 8K@60Hz, 5K@60Hz, 4K@144Hz, 4K@60Hz, 2K@240Hz, 2K@165Hz
HDCP 2.2, HDCP 1.4, HDR.. Backward compatible with DisplayPort 1.3/1.2.
Dynamic HDR, Multi-Screen Display
Conductor Material : 28AWG Tinned Copper
Supports BT601, BT709, BT2020, Adobe RGB Color Format
Refresh Rate8K@60Hz, 5K@60Hz, 4K@144Hz, 4K@60Hz, 2K@240Hz, 2K@165Hz
Features8K DisplayPort Cable 1.4 4K 144Hz 2K 240Hz
About Brand Silkland: [Officially Certified VESA Member]
Supports 8K@60Hz, 2K@240Hz, 4K@144Hz, 4K@60Hz, 5K@60Hz, 2K@165Hz, 1080P@240Hz, HDCP 2.2/1.4 and HDR
HBR3 Rated, supports transmission speed up to 32.4Gbps
Display Stream Compression 1.2(DSC), FEC forward error correction, and 32 audio channels
HBR3 rated - Backward compatible with DisplayPort 1.3/1.2/1.1

Questions about this item

Which length of the ESTONE DP28 should I choose for a desktop-to-monitor run?

The cable is offered in a single 3.3 ft length, suited for short connections between a graphics card and a nearby display.

What does the 32.4 Gbps bandwidth mean for my gaming monitor?

It enables the full DisplayPort 1.4 HBR3 rate, allowing 8K at 60 Hz, 4K at 144 Hz or 2K at 240 Hz with DSC 1.2 and HDR10.

Which DisplayPort version does the DP28 use and what resolution ceiling does it impose?

It uses DisplayPort 1.4, capping at 7680×4320 at 60 Hz while remaining backward compatible with 1.3 and 1.2 devices.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.