EN-Labs
EN-Labs SATA III 24" locking cable UV Red
A 24-inch SATA III cable with locking latches for secure drive connections at up to 6.0 Gbps
- TypeSATA III
- Length21" - 25"
- Cable Length24"
- Connector Number2
- Connector Detail1 x SATA to 1 x SATA
- Terminal GenderFemale to Female
- Latching connectors secure drives in tight cases
- 24 inch length fits most desktop layouts
- 0 Gbps SATA III speed for modern SSDs
- 26 AWG tinned copper conductors resist signal loss
- UL listed and RoHS compliant for safety
24-inch SATA III locking cable
The 24-inch SATA III cable connects drives to motherboards or host controllers at up to 6.0 Gbps. Latching 7-pin connectors prevent accidental disconnection. The 26AWG tinned copper conductors and shielding support reliable data transfer. Backwards compatibility covers SATA I and II ports.
Sustained throughput with latch security
The locking latch keeps each connector seated during vibration or cable routing stress. Shielded 26AWG conductors maintain signal integrity across the full length. Transfer speed reaches the 6.0 Gbps ceiling of the SATA III specification. Actual throughput depends on the connected drive and controller.
UV Red cable for visible routing
The UV Red jacket makes the cable easy to trace inside a crowded chassis. Straight 180-degree connectors fit tight drive bays without sharp bends. UL listed and RoHS compliant materials meet safety and environmental standards. One cable is included for a single drive connection.
Highlights
- Latching connectors secure drives in tight cases
- 24 inch length fits most desktop layouts
- 0 Gbps SATA III speed for modern SSDs
- 26 AWG tinned copper conductors resist signal loss
- UL listed and RoHS compliant for safety
Specifications
| Type | SATA III |
|---|---|
| Length | 21" - 25" |
| Cable Length | 24" |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Terminal Gender | Female to Female |
| Specifications | - Connector : 7-pin SATA 180 Degree latching Receptacle "L" Type key connector - Supports SATA revision III up to 6 Gbps - Backwards compatible with SATA I, II ports - Cable length is 24 inches, - 26AWG tinned copper conductors - UL listed and RoHS compliant |
| Shielding | Yes |
| Conductor | Copper Conductor |
| Features | The SATA 180 Degree to 180 Degree SATA III 6 Gbps Cable connects both newer SATA III and legacy SATA I, II drives to internal motherboards and host controllers. The straight connector has a latch to provide a secure connection in tight spaces. IT technicians always need a spare on hand as a troubleshooting tool. DIY gamers can quickly upgrade their computer for expanded storage. It is backed by a lifetime warranty and product support. |
| Style | Straight |
Questions about this item
Does the 24-inch SATA III cable generate any heat or draw power when running continuously?
The passive cable carries only data signals, so it produces no measurable heat and draws no power of its own during all-day operation.
What must my system already have for this 7-pin latching SATA cable to work?
You need a motherboard or host controller with a standard SATA port and a drive equipped with a matching 7-pin SATA connector.
Will the 6 Gbps-rated cable work reliably with an older SATA I or II drive I plan to keep?
Yes, the cable is backwards compatible with SATA I and II ports, so legacy drives connect and operate at their native speeds.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
YOUHUA
YOUHUA SATA Cable Kit 2×Data 0.48 m 2×Power 0.16 m
- Sata cables: 2 SATA…
$8.99
0.00010323BTC
In stock
Micro Connectors
Micro Connectors SATA cable 40 inches straight to right angle locking latch black 3 pack
- Black
$6.99
0.00008027BTC
In stock