EN-Labs 5PKSATAIII25CMCL90 5-pack SATA cable 10in 90° locking latch clear
- SATA Data Cable
- Clear
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
Five SATA 3.0 cables with locking latches, 10-inch straight-to-90-degree connectors in UV red for internal drives
Style 1 Angle
This pack contains five SATA 3.0 cables rated for 6 Gbps transfer speed. Each cable measures 10 inch (25 cm) and features a straight connector on one end and a 90 degree connector on the other. The UV red finish adds visibility inside the case. They connect motherboards or host controllers to internal hard drives and optical drives.
Locking latches on both connectors keep the link secure during continuous read and write operations. The SATA III specification supports up to 6 Gbps, maintaining that rate across the full 10 inch length without signal degradation. Backward compatibility with SATA I and SATA II ensures the cables work with older drives and controllers at their native speeds.
These cables replace worn, unlatched or too-short leads that can disconnect under vibration. The 180 to 90 degree angle eases routing in tight drive bays and against side panels. The five-pack covers a typical RAID array or multiple drive upgrades in one purchase. They do not carry power, so a separate power connection is still required for each drive.
| Brand | EN-Lab |
|---|---|
| Model | 5PKSATAIII25CMRD90 |
| Type | SATA Data Cable |
| Color | UV Red |
| Length | 10 inch / 25CM |
| Cable Length | 10 in. |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Speed | 6Gb/s |
| Specifications | Type: SATA III Data Cable w/ Locking Latch Length: 10 inch / 25CM Color: UV Red UL listed RoHS compliant |
| Features | EnLabs SATA 3 cable is designed to connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives, quickly upgrading your computer for expanded storage. Please be kindly noted that this cable does not provide power for your hard drive. It must be poweUV Red separately. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps, 2x faster than SATA II, backwards compatible with SATA I and SATA II. (Data transfer speed is limited by rating of the attached equipment.) 5 Pack SATA 3 cable is a cost effective way to provide replacement or spa |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The cables are passive data links with no active electronics, so they generate no measurable heat and consume no power of their own.
You need a motherboard or host controller with a standard SATA port and a drive that also uses a standard SATA data connector.
They are backwards compatible with SATA I and II devices, so the older drive will simply run at its own rated speed.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?