EN-Labs 3PKSATAIII18BKA SATA cable 3-pack 18 inch black straight to 90-degree locking latch
- SATA Data Cable
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
Three SATA III data cables with 90-degree locking connectors, 18 inches long in UV green
Style 1 Angle
This three-pack supplies 18-inch SATA III data cables with straight-to-90-degree connectors and locking latches. Each cable supports up to 6 Gbps transfer rates and is backward compatible with earlier SATA revisions. The UV-green jacket is UL listed and RoHS compliant. They connect host controllers to internal hard drives or optical drives without providing power.
The right-angle ends fit close to drive bays or motherboard headers where straight plugs would strain or block adjacent ports. Locking latches prevent accidental disconnects during transport or vibration. The 18-inch length reaches most internal routing paths without excess slack. Upgrading from older SATA II cables restores full 6 Gbps capability where the drive and controller support it.
The triple pack covers multi-drive installations such as RAID arrays or bulk storage expansions. UV-green colour aids cable identification in crowded cases. Buyers who need longer runs for full-tower layouts or external eSATA connections should look elsewhere. Anyone requiring integrated power delivery must use a separate power cable or adapter.
| Brand | EN-Lab |
|---|---|
| Model | 3PKSATAIII18GNA |
| Type | SATA Data Cable |
| Color | UV Green |
| Length | 18 inches |
| Cable Length | 1.5 ft. |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Specifications | Type: SATA III Data Cable w/ Locking Latch Length: 18 inch / 45CM Color: UV Green UL listed RoHS compliant |
| Features | EnLabs SATA 3 cable is designed to connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives, quickly upgrading your computer for expanded storage. Please be kindly noted that this cable does not provide power for your hard drive. It must be powered separately. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps, 2x faster than SATA II, backwards compatible with SATA I and SATA II. (Data transfer speed is limited by rating of the attached equipment.) 3 Pack SATA 3 cable is a cost effective way to provide replacement or spare |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The right-angle plug extends about 18 mm from the drive edge, so allow at least that much space between the drive and the case wall or adjacent card.
The straight connector goes to the motherboard or host controller; the 90-degree connector goes to the SATA drive. Push each latch until it clicks to lock it in place.
Replace a cable if the latch tab breaks, the connector feels loose, or you see intermittent drive detection during file transfers.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?