Ecco
Ecco 5585 Mini Lightbar LED Amber/Clear 15
A 15-inch LED mini lightbar delivering SAE J845 Class 1 amber and white flashing output at 60 watts with IP69K sealing for universal 12-24 V DC permanent mounting
- SAE J845 Class 1 certified for high-visibility warning
- IP69K rated to withstand high-pressure wash-downs
- 12-24V DC operation suits diverse vehicle fleets
- Eight LED heads deliver 60 W flashing output
- 15-inch low-profile bar mounts permanently anywhere
15-inch mini lightbar for universal vehicles
The Ecco 5585 Mini Lightbar measures 15 inches long and uses LED technology to produce flashing amber and white light. It carries an SAE J845 Class 1 rating and an IP69K ingress rating for harsh environments. The unit operates on 12-24V DC power and draws 60 W.
Replaces older halogen or strobe beacons
Upgrading is worthwhile when a low-profile rectangular bar with permanent mounting and blunt-cut wiring suits the installation better than a rotating beacon. The eight LED heads deliver Class 1 warning output without the maintenance of moving parts or filament bulbs.
Verify 12-24V DC supply
Confirm the vehicle electrical system provides 12-24V DC and that a 15-inch by 9-inch by 2 1/2-inch footprint fits the chosen mounting surface. Ensure blunt-cut wires can be terminated to a switched circuit and that local regulations permit amber/white flashing patterns.
Highlights
- SAE J845 Class 1 certified for high-visibility warning
- IP69K rated to withstand high-pressure wash-downs
- 12-24V DC operation suits diverse vehicle fleets
- Eight LED heads deliver 60 W flashing output
- 15-inch low-profile bar mounts permanently anywhere
Specifications
| Brand | ECCO |
|---|
Questions about this item
Will the 15 in lightbar and 9 in depth fit my roof mounting area?
The bar measures 15 in long, 9 in deep and 2 1/2 in high, so compare those dimensions to your roof footprint before ordering.
How do I wire the blunt-cut leads into a 12-24V DC system without causing a short?
Connect each stripped wire to a fused circuit that matches the 60 W draw, use heat-shrink butt splices, and seal every joint against moisture.
When should I expect to replace the eight LED heads on this IP69K unit?
LEDs are rated for tens of thousands of hours; plan to replace the whole bar only if water ingress or physical damage occurs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



