APC APCRBC124 UPS Replacement Battery 124
- Maintenance-free se…
- BR1200G-FR, BR1200G…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Eaton
A 1U rack-mount power distribution unit converts a single NEMA L5-30P input into five NEMA 5-20R outlets, supporting up to 2880 watts at 120 volts
The Eaton EHBPL3000R-PDU1U is a 1U horizontal power distribution unit designed to sit alongside compatible Eaton UPS systems in a standard rack. It accepts a single NEMA L5-30P input and provides five NEMA 5-20R outlets for connected equipment. The unit supports loads up to 2880 watts at 120 volts.
This maintenance bypass panel enables hot-swappable battery replacement from the front panel without removing the UPS from the rack enclosure. A 3.3-foot input cord connects the PDU to the UPS, allowing continuous power to attached devices while the battery module is exchanged. It is built for use with specific Eaton 5130, Evolution S, Pulsar M and 9130 series units.
The PDU delivers a maximum of 24 amps through its five 20-amp receptacles, distributing up to 2880 watts across connected servers or network gear. It operates on single-phase 110-125 volt supply and does not increase the UPS rating beyond its native 3000 VA limit. Builds requiring higher outlet counts or three-phase input will need a different power architecture.
| Brand | EATON |
|---|---|
| Model | EHBPL3000R-PDU1U |
| Type | Other |
| Specifications | Mounting Style: Horizontal Form factor: 1U Input Max Watts: 2880 Watts Interface: NEMA L5-30P Cord Length: 3.3 Feet Voltage: 1-Phase 110-125V Current: 24A Output Outlets: 5 x NEMA 5-20R |
| Features | For UPS systems up to 3000 VA / 2880 Watts Facilitates hot-swappable battery replacement from the front panel - with no need to remove the UPS from the rack - the HotSwap MBP is also ideal when exchanging a faulty unit or upgrading to a new UPS Flexible mounting options, including rear panel, top, left, or right, depending on the UPS model Rugged, industrial-strength design for dependability and long service life |
| Dimensions | 2.10" x 17.30" x 3.80" |
| Shipping weight | 3.20 kg |
| Package size | 472 × 245 × 65 mm |
The unit is rated for 2880 watts at 24 amps on a 120 V circuit.
Passive distribution generates minimal extra heat; the 1U metal chassis dissipates it without fans.
Compatible units include the Eaton 5130, 9130, Evolution S and Pulsar M series.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
More in UPS Replacement Battery & Accessories
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?