We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue SATA cable with straight connectors, 10.5 inches

DELL

DELL SATA cable 9D25P 10.5 inches blue

SKU CH-TXNW-0Y4XS

Connects SATA drives with a 10.5-inch blue cable for tidy internal routing

  • 5 inch length fits tight drive bays easily
  • Blue jacket identifies the cable at a glance
  • SATA interface connects drives to motherboards directly
  • New condition means factory-fresh connectors and insulation
  • Dell 9D25P part number matches service manuals precisely

Internal drive link

The Dell 9D25P SATA cable connects a single SATA drive to a motherboard or controller. It is intended for builders or technicians fitting a 2.5-inch or 3.5-inch hard drive or SSD inside a desktop chassis. The blue jacket makes the cable easy to trace among other wiring.

Length and airflow

At 10.5 inches the cable reaches nearby drive bays without leaving long slack that blocks airflow. The fixed length cannot span wide cases or routes that require sharp bends around large coolers. Builders needing longer runs or right-angle ends must choose a different part.

Dell 9D25P part number

The 9D25P identifier matches Dell service documentation for this exact assembly. Verify that number against your system's parts list before ordering, because other SATA cables may differ in pin-out, latch style or length.

Highlights

  • 5 inch length fits tight drive bays easily
  • Blue jacket identifies the cable at a glance
  • SATA interface connects drives to motherboards directly
  • New condition means factory-fresh connectors and insulation
  • Dell 9D25P part number matches service manuals precisely

Specifications

No published specifications for this item yet.

Questions about this item

Which length should I pick for a standard drive bay?

The cable measures 10.5 inches, which fits most internal SATA drive installations without excess slack.

What does the 10.5 inch length mean once the cable is routed inside a case?

It provides enough reach from a motherboard SATA port to a 3.5 inch or 2.5 inch drive bay while keeping cable management tidy.

Does the SATA interface cap transfer speed on a modern SSD?

The cable carries the SATA signal; the practical ceiling is the SATA revision supported by the drive and controller, not the cable itself.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in SATA / eSATA Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.