We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red SATA cable, one right-angle and one straight connector

Nippon Labs

Nippon Labs SATA-1MR 1m right-angle SATA cable

SKU CH-MSNP-5B5GW MPN SATA-1MR

One-metre red SATA cable with a right-angle connector for tight spaces and improved airflow

  • TypeSATA
  • ColorRed
  • Length1M (3.28 ft.)
  • Cable Length3.28 ft. (1m)
  • Connector Number2
  • Features1 Meter 2 shielded 26 AWG SATA cable- one right angle to one
  • Right-angle connector eases tight-case routing
  • One-metre shielded 26 AWG cable supports high-speed SATA links
  • Red jacket simplifies cable identification
  • Narrow profile improves internal airflow
  • RoHS-compliant hot-swap ready design

Cable design and use

The Nippon Labs SATA-1MR is a 1 metre red SATA cable with one right-angle and one straight 7-pin connector. It connects a high-speed Serial ATA device to a Serial ATA controller using shielded 26 AWG conductors. The narrow profile simplifies cable routing and improves airflow inside the case.

Who benefits and who does not

Builders who need a right-angle connector at the drive end to clear tight drive cages or crowded motherboard headers will find this cable useful. Buyers who require straight connectors at both ends, longer reach than 1 metre, or a different colour should look at other options.

Installation notes

The right-angle plug inserts in a fixed orientation, so check the port layout before routing the cable. The slim jacket eases passage through grommets and between components. Hot-swap capability is supported, but ensure the system and drive both support the feature before relying on it.

Highlights

  • Right-angle connector eases tight-case routing
  • One-metre shielded 26 AWG cable supports high-speed SATA links
  • Red jacket simplifies cable identification
  • Narrow profile improves internal airflow
  • RoHS-compliant hot-swap ready design

Specifications

BrandNippon Labs
ModelSATA-1MR
TypeSATA
ColorRed
Length1M (3.28 ft.)
Cable Length3.28 ft. (1m)
Connector Number2
Features1 Meter 2 shielded 26 AWG SATA cable- one right angle to one straight 7 Pins connector
Hot-swap capability
RoHS Compliant
high-speed Serial ATA device to a Serial ATA controller
Narrow cables design:
1) simplifies cable routing and installation
2) improves air flow within CPU (no more big ribbons blocking air movement
Shipping weight0.04 kg
Package size154 × 114 × 20 mm

Questions about this item

Do I need a SATA controller and a SATA device with standard 7-pin ports to use this cable?

Yes, the cable connects a high-speed Serial ATA device to a Serial ATA controller using two standard 7-pin connectors.

Will the right-angle connector fit alongside older straight SATA cables in a tight drive bay?

The narrow, shielded 26 AWG design simplifies routing and improves airflow, so the right-angle end sits flush without blocking adjacent straight connectors.

How can I confirm the link is running at full SATA speed after installation?

The drive should be detected immediately with hot-swap capability active and transfer rates matching the controller's SATA specification.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.