We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three black SATA data cables with locking metal latches, 50 cm each

NShi

NShi SATA III 6 Gbit/s Locking Data Cable 50 cm Black 3 Pack

SKU CH-EBH5-RXC6K

Three straight SATA cables with metal locking latches, 50 cm each, support 6 Gbit/s data transfer for HDDs, SSDs and optical drives

  • TypeCable Connectors
  • ColorBlack
  • Length50 cm
  • Cable Length50 cm
  • Connector NumberSATA Male
  • Connector DetailSATA Male
  • Secure locking latch prevents accidental disconnection during operation
  • SATA III specification supports up to 600 MB/s data transfer
  • 50 cm length fits standard internal drive installations
  • Three cables included for multiple drives or spare replacements
  • Backward compatible with SATA I and SATA II devices

Three-Cable Pack for Internal Drives

This pack supplies three straight SATA data cables, each 50 cm long, with a metal locking latch on every connector. They connect 2.5 inch SSDs, 3.5 inch HDDs, optical drives or RAID controllers to a motherboard or host controller. The black colour aids cable management inside the case. Buyers who need right-angled plugs or an external eSATA link cannot use these cables.

Sustained Throughput at 6 Gbit/s

Each cable meets the SATA III specification, supporting data rates up to 6 Gbit/s (600 MB/s) continuously rather than only in short bursts. The locking latch prevents accidental disconnection during vibration or chassis movement, keeping the link stable under sustained load. Backward compatibility with SATA I and SATA II allows the same cables to serve older hardware without speed negotiation issues.

Metal Locking Latch on Every Connector

The decisive specification is the integrated metal latch that clicks into the drive and motherboard ports, ensuring the cable stays seated until deliberately released. Without this feature a standard friction-fit cable can work loose over time, especially in systems that are moved or vibrate. If your build does not require a positive lock, a simpler unlatched cable would also function.

Highlights

  • Secure locking latch prevents accidental disconnection during operation
  • SATA III specification supports up to 600 MB/s data transfer
  • 50 cm length fits standard internal drive installations
  • Three cables included for multiple drives or spare replacements
  • Backward compatible with SATA I and SATA II devices

Specifications

TypeCable Connectors
ColorBlack
Length50 cm
Cable Length50 cm
Connector NumberSATA Male
Connector DetailSATA Male
Terminal GenderSATA Male
SpecificationsSATA Male, 50 cm, Cable

Questions about this item

Does the 50 cm SATA III cable generate any heat or noise when running all day?

The cable is a passive data link with no active components, so it produces no heat or noise during continuous operation.

What must I already own for the straight SATA Male connectors to work?

You need a motherboard or host controller with a standard SATA port and a 2.5 inch SSD, 3.5 inch HDD or optical drive that also has a SATA interface.

How do the 6 Gbit/s cables behave alongside older SATA I or SATA II hardware I may keep?

They are backward compatible, so they will negotiate the slower SATA I or SATA II speed automatically when connected to legacy drives or controllers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.