We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four black Mini SAS HD cables for PowerEdge R340 3.5-inch hot-swap backplane

DELL

DELL PowerEdge R340 Hot-Swap SAS Cable 4x3.5" PERC S140 VTP09

SKU CH-D3C6-9T3EG

Connects the PERC S140 controller to a 4 x 3.5" hot-swap backplane using four Mini SAS HD (SFF-8643) cables for SAS and SATA drives

  • TypeHot-Swappable SAS Cable Compatible Brand: For Dell
  • Connects PERC S140 RAID controller to 4 x 3.5" backplane
  • Mini SAS HD SFF-8643 connector for SAS/SATA drives
  • Hot-swap design enables drive changes without downtime
  • Genuine Dell VTP09 part built for PowerEdge R340 chassis
  • Set of four cables covers all drive bays

Purpose-built for PowerEdge R340

This cable set links the onboard or PERC S140 RAID controller to the 4x3.5" hot-swap backplane inside a Dell PowerEdge R340 server. It ships as a lot of four genuine Dell VTP09 cables, each terminated with a Mini SAS HD (SFF-8643) connector. The parts are new and intended for IT teams maintaining or populating this specific 340 chassis.

Handles four 3.5" SAS or SATA drives

Each cable carries one drive channel, so the set supports the full complement of four 3.5" bays. The SAS/SATA backplane interface means both drive types are electrically compatible, but the cable does not add extra ports beyond the four provided. Builds needing more than four drives or a different backplane layout will require a different cable kit.

OEM-length routing with Mini SAS HD ends

The black cables are cut to the exact length Dell specifies for the R340, so they fit the chassis routing channels without slack or tension. Mini SAS HD (SFF-8643) connectors lock securely to the controller and backplane, surviving repeated hot-swap cycles. No adapters or converters are included; the connectors mate directly to the PERC S140 and the 3.5" backplane sockets.

Highlights

  • Connects PERC S140 RAID controller to 4 x 3.5" backplane
  • Mini SAS HD SFF-8643 connector for SAS/SATA drives
  • Hot-swap design enables drive changes without downtime
  • Genuine Dell VTP09 part built for PowerEdge R340 chassis
  • Set of four cables covers all drive bays

Specifications

BrandDell
ModelPowerEdge R340
TypeHot-Swappable SAS Cable
Compatible Brand: For Dell

Questions about this item

Will the Mini SAS HD (SFF-8643) cables connect my existing PERC S140 controller to the 4x3.5" backplane in a PowerEdge R340?

Yes, the four VTP09 cables are built to link the PERC S140 RAID controller directly to the 4x3.5" hot-swap backplane in the PowerEdge R340 chassis.

How can I verify the SAS cables are seated correctly after installation?

Each Mini SAS HD (SFF-8643) connector clicks into the controller and backplane ports; the server BIOS and PERC S140 firmware will then list all attached 3.5" SAS or SATA drives.

Does the VTP09 lot of four include every cable needed, or must I buy brackets or screws separately?

The set supplies the four Mini SAS HD (SFF-8643) cables required for the 4x3.5" backplane; mounting hardware for drives or the backplane itself is not included.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.