We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue UV sleeved SATA cable 30 cm with 180° and 90° connectors

Darkside Computer Modding

Darkside Computer Modding SATA cable 30cm 180° to 90° Blue UV DS-0079

SKU CH-8C3E-4VMWX

A 30 cm SATA 3.0 data cable with an 180° to 90° angled connector and blue UV sleeving

  • Cable Length1 ft.

Color Blue

  • SATA 3.0 data transfer speed supported
  • 30 cm length fits compact builds
  • 180° to 90° connectors ease tight routing
  • Blue UV sleeve adds visible style
  • Latch secures connection against vibration

Cable layout for tight builds

The Darkside DS-0079 is a 30 cm SATA 3.0 data cable with a straight 180° connector on one end and a right-angle 90° connector on the other. It suits system builders who need a short, routed link between a motherboard port and a drive mounted close to the board edge.

Replaces loose or long stock cables

Standard straight-to-straight leads often leave excess length that blocks airflow or forces sharp bends near the latch. This cable removes that slack and the 90° end lets the wire run parallel to the PCB, so the upgrade is worth it whenever the drive sits directly beside a straight header.

Handles one SATA device at full 3.0 speed

The 30 cm run keeps signal loss negligible for a single SSD or hard drive, and the latched connectors resist vibration in transport. It does not support port multipliers or backplane fan-out, so builders who need multiple drives from one header should look elsewhere.

Highlights

  • SATA 3.0 data transfer speed supported
  • 30 cm length fits compact builds
  • 180° to 90° connectors ease tight routing
  • Blue UV sleeve adds visible style
  • Latch secures connection against vibration

Specifications

Cable Length1 ft.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What clearance does the 30 cm 180° to 90° SATA cable need behind the drive?

The straight connector sits flush against the drive while the right-angle end points sideways, so allow roughly the cable diameter plus the latch height behind the device.

How do I seat the latching connectors on this DS-0079 cable?

Push each end straight in until the metal clip clicks; the 90° end must be aligned with the port before pressing, not forced at an angle.

When should the blue UV-sleeved SATA 3.0 cable be replaced?

Replace it if the sleeve frays, the latch tabs snap off, or the connectors become loose enough to cause intermittent link errors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.