We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red UV sleeved SATA cable, 30 cm, 180° to 90° connectors

Darkside Computer Modding

Darkside Computer Modding SATA cable 30 cm 180° to 90° Red UV DS-0078

SKU CH-Q95H-6F98E

A 30 cm SATA 3.0 data cable with a straight and a right-angle latch connector in red UV-reactive sleeving

  • Cable Length1 ft.

Color Red

  • Clean 30 cm routing with 180° to 90° angled connectors
  • Secure SATA 3.0 connection via locking latch design
  • Red UV-reactive sleeve highlights cable runs under UV light
  • Durable sleeved construction protects wires during frequent rebuilds
  • New cable ready for immediate installation in any build

30 cm SATA 3.0 cable for modders

This 30 cm SATA 3.0 data cable links a drive to a motherboard or controller using a straight 180° connector on one end and a right-angle 90° connector on the other. The red UV-reactive sleeving is aimed at builders who want colour-coordinated cable runs inside a windowed case. It suits any system that uses a standard SATA data port.

Latch connectors simplify installation

Both ends carry a latch so the plug stays seated until you press the release tab, reducing the chance of accidental disconnects during hardware swaps. The mixed 180° and 90° orientation lets you route the cable tight against a drive or board edge without sharp bends. Take care to align the L-shaped key before pressing; forcing the connector can damage the port.

30 cm length fits compact builds

At 30 cm the cable reaches between closely spaced SATA ports and 2.5″ or 3.5″ drives in small-form-factor chassis, leaving minimal slack for a clean look. It will not span the full length of a full-tower case or reach drives mounted in distant bays. The cable carries data only; a separate SATA power lead is required for the drive.

Highlights

  • Clean 30 cm routing with 180° to 90° angled connectors
  • Secure SATA 3.0 connection via locking latch design
  • Red UV-reactive sleeve highlights cable runs under UV light
  • Durable sleeved construction protects wires during frequent rebuilds
  • New cable ready for immediate installation in any build

Specifications

Cable Length1 ft.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I confirm the 30 cm SATA 3.0 cable with 180° to 90° connectors is seated correctly after installation?

Push each end until the latch clicks; the straight connector goes to the motherboard port and the right-angle end to the drive, then verify the drive appears in BIOS.

What comes with the DS-0078 cable and what must I buy separately?

The box contains one red UV-sleeved SATA data cable, 30 cm long, with a straight connector on one side and a 90° connector on the other; no drive, motherboard or power cable is included.

Which length and connector combination should I choose for a tight chassis build?

Pick the 30 cm version with 180° to 90° ends when space behind the drive is limited; longer 18 inch cables or straight-to-straight styles suit more open layouts.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.