We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Jet black sleeved SATA 3.0 data cable, 45 cm, straight connectors with latches

Darkside Computer Modding

Darkside Computer Modding 45cm SATA 3.0 180° to 180° Data Cable with Latch Jet Black

SKU CH-W4W5-06STD

A 45 cm SATA 3.0 data cable with straight 180° connectors on both ends and locking latches in jet black sleeving

  • Length1.5 ft.
  • Cable Length1.48 ft.

Color Black

  • SATA 3.0 interface supports up to 6 Gbps transfer speeds
  • 45 cm length fits mid-tower and full-tower chassis cleanly
  • 180° straight connectors on both ends simplify drive alignment
  • Metal latch secures connection against vibration and accidental disconnect
  • Jet-black sleeved jacket resists abrasion and enhances build aesthetics

Modding SATA cable for custom builds

This 45 cm SATA 3.0 data cable connects storage drives or motherboard headers in a custom PC build. The jet black sleeving matches dark-themed aesthetics while the latch secures the connection against vibration. It suits modders who want clean cable routing without loose plugs. The 180° connectors keep the cable straight for tidy runs.

Straight connectors free routing options

Both ends use 180° straight plugs so the cable lies flat along motherboard trays or behind drive cages. No right-angle bends means you choose the path without connector interference. The latch clicks onto SATA ports to prevent accidental disconnects during transport or upgrades. Length of 1.48 ft reaches mid-tower drive bays comfortably.

Six Gbps bandwidth with modest reach

Rated for SATA 3.0 speeds the cable handles SSDs and hard drives at full interface throughput. The 45 cm length covers typical distances between motherboard ports and 3.5 inch bays but falls short for full-tower bottom mounts or external enclosures. Builders needing longer runs or 90° angled ends should select a different variant.

Highlights

  • SATA 3.0 interface supports up to 6 Gbps transfer speeds
  • 45 cm length fits mid-tower and full-tower chassis cleanly
  • 180° straight connectors on both ends simplify drive alignment
  • Metal latch secures connection against vibration and accidental disconnect
  • Jet-black sleeved jacket resists abrasion and enhances build aesthetics

Specifications

Length1.5 ft.
Cable Length1.48 ft.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What is the maximum data-transfer rate of this SATA 3.0 cable?

The cable supports the SATA 3.0 specification, which provides up to 6 Gb/s bandwidth for connected storage devices.

Does the sleeved 45 cm cable add noticeable heat or signal noise inside a case?

The sleeved design is passive and carries only low-voltage signalling, so it adds no measurable heat or electrical noise during continuous operation.

Which drives and motherboards accept the straight 180° latching connectors?

Any standard SATA drive or motherboard port with a 7-pin data connector will accept the straight 180° latching plugs on this cable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.