We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White sleeved SATA 3.0 data cable with straight connectors on both ends, 45 cm length

Darkside Computer Modding

Darkside Computer Modding 45cm SATA 3.0 180° to 180° Data Cable White DS-0157

SKU CH-74QE-96GY0

A 45 cm SATA 3.0 data cable with straight 180° connectors and a white sleeve

  • Length1.5 ft.
  • Cable Length1.48 ft.

Color White

  • SATA 3.0 speed supports fast data transfer
  • 45 cm length fits standard case layouts
  • 180° straight connectors suit direct drive mounting
  • White sleeved finish adds clean modding style
  • Latch mechanism secures connection against vibration

White SATA cable for modders

The Darkside DS-0157 is a 45 cm SATA 3.0 data cable with straight 180-degree connectors on both ends. Its white sleeving is intended for builders who want a clean, coordinated look inside a windowed chassis. The cable is sold new and targets enthusiasts assembling or re-cabling a custom system.

Length and connector orientation limits

At 1.5 ft the reach suits only short runs between a motherboard port and a nearby drive bay; longer routes will need a different length from the 12 to 18 inch range. Both ends are fixed at 180 degrees, so the cable cannot make a right-angle turn at the device or board without adding strain or blocking adjacent ports.

Sleeved construction and latch retention

The full-length sleeving protects the wires from abrasion and keeps the bundle rigid enough to hold a routed shape during assembly. Integrated latches on each connector click into place, reducing the chance of accidental disconnection when other components are moved or when the case is transported. Builders who need angled plugs for tight clearances should choose the 90-degree variant instead.

Highlights

  • SATA 3.0 speed supports fast data transfer
  • 45 cm length fits standard case layouts
  • 180° straight connectors suit direct drive mounting
  • White sleeved finish adds clean modding style
  • Latch mechanism secures connection against vibration

Specifications

Length1.5 ft.
Cable Length1.48 ft.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I pick the 45 cm cable or one of the other lengths offered?

The range spans 12 to 18 inches; choose 45 cm (18 in) when the drive sits farther from the motherboard, and a shorter length when the run is tight to avoid excess slack.

What does the SATA 3.0 label mean for actual transfer speed in my build?

SATA 3.0 caps the link at 6 Gbit/s, so a connected SSD or hard drive will hit its rated sequential throughput up to that ceiling.

Does the 180° to 180° connector orientation limit which ports I can use?

Both ends are straight 180° plugs, so they fit any standard SATA port without needing the 90° angled variant for tight clearances.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.