We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Jet black pre-sleeved Y-cable splitter with eight 3-pin fan connectors, 75 cm total length

Darkside Computer Modding

Darkside Computer Modding 3-Pin Quad Push-Pull Fan Y-Cable Splitter 8x Fans Jet Black 75cm DS-0101

SKU CH-HHJF-AA4XT

Connects eight 3-pin fans in push-pull across dual radiators to a single 3-pin header, pre-sleeved in jet black with a 75 cm reach

  • Cable Length2.5 ft.
  • Connect 8 fans in push-pull from one 3-pin header
  • 75 cm pre-sleeved cable keeps quad-radiator runs tidy
  • 5 ft total length reaches dual-radiator layouts easily
  • Optimised for quad radiators so wiring stays clean
  • Single 3-pin source powers all fans, simplify fan control

Eight-Fan Push-Pull Cable

This pre-sleeved splitter joins eight 3-pin fans in a push-pull layout on dual radiators to a single 3-pin header on a fan controller. It targets builders running quad-radiator loops who want one control point for all fans. The jet-black sleeving keeps the wiring tidy inside the case. It is not suited for systems that use 4-pin PWM headers or need per-fan speed reporting.

75 cm Pre-Sleeved Reach

The cable spans roughly 75 cm from the controller header to the furthest fan branch, giving enough length for large chassis without excess slack. Each branch ends in a standard 3-pin female socket that locks onto the fan header. The fixed Y topology means the fan order is set during assembly. Builders who need modular extensions or longer runs will need additional cables.

Passive Power Distribution

No active electronics sit on the cable, so it adds no noise or heat of its own. Total current draw equals the sum of all connected fans and must stay within the controller’s rated output. The warning in the specification reminds installers to verify that combined fan wattage does not exceed the power source limit. Exceeding that limit risks controller shutdown or damage.

Highlights

  • Connect 8 fans in push-pull from one 3-pin header
  • 75 cm pre-sleeved cable keeps quad-radiator runs tidy
  • 5 ft total length reaches dual-radiator layouts easily
  • Optimised for quad radiators so wiring stays clean
  • Single 3-pin source powers all fans, simplify fan control

Specifications

Cable Length2.5 ft.

Questions about this item

What does the 3-pin connector on this Y-cable limit for fan control?

The single 3-pin header provides power and tachometer feedback but no PWM signal, so all eight fans run at the same voltage-controlled speed.

How much clearance does the 75 cm pre-sleeved cable need inside a quad-radiator build?

The 75 cm total length is routed from one 3-pin source to eight fan connectors, so plan the run between the dual radiators and the fan controller or motherboard header.

Which step do builders often miss when wiring eight fans in push-pull with this splitter?

Add the wattage of all eight fans and confirm the total stays within the 3-pin power source rating before plugging everything in.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.