We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Single rectangular lithium-ion camera battery with silver label and contacts

CPY

CPY A-1 7.2V 17.5Wh Li-ion Battery 1-Pack

SKU CH-WTSA-06W02 MPN A-1

Rechargeable 7.2 V 17.5 Wh lithium-ion cell powers Arlo Pro, Pro 2 and Go cameras with a one-hour charge

  • Specifications7.2V 17.5Wh=2440mAh
  • TypeBatteries
  • Battery Pack1-pack
  • Battery TypeLi-ion
  • Battery Capacity17.5Wh
  • Battery Voltage7.2V
  • 2 V output powers compatible Arlo cameras reliably
  • 5 Wh capacity delivers extended recording time between charges
  • 2440 mAh lithium-ion cell recharges fully in one hour
  • Single-pack design lets you replace only the battery you need
  • Fits Arlo Pro, Pro 2, Go and listed VMA, VMC, VMS, VCS models

Compatible Camera Battery Pack

This rechargeable lithium-ion cell is built for Arlo Pro and Arlo Pro 2 security cameras. It also fits Arlo Go and select VMA, VMC, VMS and VCS models listed in the compatibility table. The single-unit pack delivers a direct replacement for the original power source.

Voltage and Capacity Match

The cell supplies 7.2 volts and 17.5 watt-hours, equal to 2440 milliampere-hours. This exact electrical profile is the deciding factor for safe operation in the supported cameras. A different voltage or capacity would prevent the camera from functioning correctly.

Sustained Surveillance Runtime

Under continuous recording the battery maintains a steady discharge curve rather than a brief peak. The chemistry is rated for a one-hour recharge cycle, allowing the camera to return to monitoring duty quickly after depletion. This pattern supports long-term outdoor deployments where frequent swaps are impractical.

Highlights

  • 2 V output powers compatible Arlo cameras reliably
  • 5 Wh capacity delivers extended recording time between charges
  • 2440 mAh lithium-ion cell recharges fully in one hour
  • Single-pack design lets you replace only the battery you need
  • Fits Arlo Pro, Pro 2, Go and listed VMA, VMC, VMS, VCS models

Specifications

BrandARLO
ModelARLO PRO
Specifications7.2V 17.5Wh=2440mAh
TypeBatteries
Battery Pack1-pack
Battery TypeLi-ion
Battery Capacity17.5Wh
Battery Voltage7.2V
Charging Time1 Hour
Sports Team1 Piece
FeatureBattery, Battery Backup, Rechargeable

Questions about this item

How long will the 17.5 Wh rating actually run my Arlo Pro 2 camera?

The 17.5 Wh capacity equals 2440 mAh at 7.2 V, matching the original Arlo Pro and Pro 2 battery so runtime is the same as the factory pack.

Does the 7.2 V output work with the Arlo Go and the listed VMA4400 and VMC4030 part numbers?

Yes, 7.2 V is the exact voltage those models require, and the pack is listed as compatible with Arlo Go, VMA4400, VMC4030 and related part numbers.

Will this battery pack fit the same compartment as the original Arlo Pro battery without modification?

It is built to the A-1 form factor (P/N 308-10029-01) which replaces the original Arlo Pro and Pro 2 battery directly; it does not fit the newer A-2 model.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.