Computer Memory Solutions
Computer Memory Solutions 16GB (2x8GB) DDR3L 1600MHz SODIMM 204-Pin CL11 1.35V
16 GB kit of two 8 GB DDR3L SODIMM modules at 1600 MHz, CL11, 1.35 V, validated for Toshiba Satellite C55-A5311, C55-A5309 and C55-A5302
- Capacity16GB (2 x 8GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Timing11-11-11
- Voltage1.35V
- 16 GB dual-channel kit boosts multitasking headroom
- DDR3L 1600 MHz CL11 matches factory timing spec
- Low 1.35 V DDR3L cuts power draw and heat
- 204-pin SODIMM fits Toshiba Satellite C55-A5311, C55-A5309, C55-A5302
- Unbuffered non-ECC modules install without BIOS changes
16 GB DDR3L kit for Toshiba Satellite C55
This 16 GB kit consists of two 8 GB DDR3L SO-DIMM modules rated at 1600 MHz with CL11 timing. It is built for Toshiba Satellite C55-A5311, C55-A5309 and C55-A5302 notebooks that accept 204-pin memory. The unbuffered, non-ECC design matches the factory specification for these systems.
Capacity and headroom for the C55 platform
The two modules fill both memory sockets and reach the 16 GB maximum supported by the listed Satellite models. Everyday multitasking, web browsing and office applications run within this limit. Workloads that require more than 16 GB or demand ECC error correction cannot be accommodated by this kit.
Fits two 204-pin slots at 1.35 V
Installation uses the two existing SO-DIMM slots; no extra brackets or adapters are needed. The modules operate at the standard 1.35 V DDR3L voltage, drawing the same power as the original memory. Because they have no heat spreaders, they sit low under tight notebook covers and leave the surrounding board area clear.
Highlights
- 16 GB dual-channel kit boosts multitasking headroom
- DDR3L 1600 MHz CL11 matches factory timing spec
- Low 1.35 V DDR3L cuts power draw and heat
- 204-pin SODIMM fits Toshiba Satellite C55-A5311, C55-A5309, C55-A5302
- Unbuffered non-ECC modules install without BIOS changes
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10246412800SODRL |
| Capacity | 16GB (2 x 8GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Toshiba Satellite C55-A5311, C55-A5309, C55-A5302 |
| Package Content | 2 Memory RAM Sticks |
Questions about this item
Will these DDR3L 1600MHz modules run at the correct speed alongside the original memory in my Toshiba Satellite C55-A5311?
Yes, the kit is validated for the C55-A5311, C55-A5309 and C55-A5302 and operates at DDR3L 1600 (PC3L 12800) with CL11 11-11-11 timing at 1.35V, matching the platform specifications.
How can I confirm the 16GB (2x8GB) kit is recognised and running at 1600MHz after installation?
Enter the BIOS or use a system-information tool; it should report 16GB total, DDR3L 1600MHz speed, CL11 latency and 1.35V voltage for both SODIMM slots.
Does the package contain only the two 8GB SODIMM sticks, or are tools or adapters included?
The box includes exactly two 204-pin DDR3L SODIMM modules; no screwdrivers, brackets or additional adapters are supplied.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Intel HNS2600KPF barebone pc 1U dual Xeon DDR4 512 GB
- Xeon
- Socket R3 (LGA2011-…



