We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rack-mount switch, 1U height, 48 RJ-45 ports front, four SFP+ slots right

Cisco Systems, Inc.

Cisco Systems, Inc. C1300-48P-4X network switch, 48 PoE+ ports, 4×10G SFP+

SKU CH-4WQY-Z6Q77 MPN C1300-48P-4X

A managed 1U rack switch with 48 PoE+ ports, 370 W budget and four 10G SFP+ uplinks for enterprise access

  • FormatRackmount
  • StandardsLayer Supported: 3 Networking Standards: IEEE 802.1x IEEE 80
  • Network MediaMedia Type Supported: Optical Fiber Twisted Pair Ethernet Te
  • Network Management TypeManaged
  • Uplink InterfaceTotal Number of Expansion Slots: 4.0 Expansion Slot Type: SF
  • Primary PortsInterfaces/Ports Total Number of Network Ports: 48 Uplink Po

Ports 48x 10/100/1000 RJ45 · 4x10G SFP+

PoE · Non-PoE PoE

Power Budget 370W

  • 48 PoE+ ports power IP phones and cameras directly with a 370 W budget
  • Four 10 Gb SFP+ uplinks provide high-speed fibre or copper aggregation links
  • Layer 3 routing support enables scalable network segmentation and inter-VLAN traffic handling
  • 1U rack-mountable chassis fits standard cabinets at 1.7 in height and 13.8 in depth
  • Managed operation with IEEE 802.3az Energy Efficient Ethernet reduces power draw during low utilisation

Cisco Catalyst 48-Port PoE+ Switch

The Cisco Catalyst C1300-48P-4X is a managed rackmount switch built for enterprise, business and office networks. It delivers 48 Gigabit Ethernet PoE+ ports and four 10 Gigabit Ethernet SFP+ uplinks in a 1U form factor. The switch supports Layer 3 routing for scalable network designs.

Suits IP phone, camera and access point deployments

This switch fits installations that need PoE+ power for IP phones, wireless access points and IP cameras with a 370 W PoE budget. It is not intended for environments that need higher PoE budgets per port, dense higher-speed uplinks or chassis-based modular supervisors.

370 W PoE budget across 48 ports

The total PoE budget of 370 W determines how many powered devices can run simultaneously at full PoE+ capacity. Buyers should calculate their per-port power draw against this limit before deploying the switch.

Highlights

  • 48 PoE+ ports power IP phones and cameras directly with a 370 W budget
  • Four 10 Gb SFP+ uplinks provide high-speed fibre or copper aggregation links
  • Layer 3 routing support enables scalable network segmentation and inter-VLAN traffic handling
  • 1U rack-mountable chassis fits standard cabinets at 1.7 in height and 13.8 in depth
  • Managed operation with IEEE 802.3az Energy Efficient Ethernet reduces power draw during low utilisation

Specifications

BrandCisco Systems, Inc
SeriesCatalyst
Part NumberC1300-48P-4X
FormatRackmount
StandardsLayer Supported:
3
Networking Standards:
IEEE 802.1x
IEEE 802.3az
IEEE 802.3ad
IEEE 802.3
IEEE 802.3u
IEEE 802.3ab
IEEE 802.3z
IEEE 802.3x
IEEE 802.1D
IEEE 802.1w
IEEE 802.1s
IEEE 802.3af
IEEE 802.3at
IEEE 802.1p
IEEE 802.11ac
IEEE 802.1Q
IEEE 802.1ab
Network MediaMedia Type Supported:
Optical Fiber
Twisted Pair
Ethernet Technology:
10 Gigabit Ethernet
Network Technology:
10/100/1000Base-T
10GBase-X
Network Management TypeManaged
Uplink InterfaceTotal Number of Expansion Slots:
4.0
Expansion Slot Type:
SFP+
Shared SFP Slot:
Yes
Number of SFP+ Slots:
4
Primary PortsInterfaces/Ports
Total Number of Network Ports:
48
Uplink Port:
Yes
Modular:
Yes
Network (RJ-45):
Yes
Port/Expansion Slot Details:
48 x Gigabit Ethernet PoE+
4 x 10 Gigabit Ethernet Expansion Slot
PowerPoE (RJ-45) Port:
Yes
PoE Budget:
370 W
Input Voltage:
120 V AC
230 V AC
Frequency:
50 Hz
60 Hz
Power Source:
Power Supply
AC
Number of Power Supplies Installed:
1
Power Consumption:
463.32 W
DimensionsCompatible Rack Unit:
1U
Form Factor:
Rack-mountable
Height:
1.7"
Width:
17.5"
Depth:
13.8"
WeightWeight (Approximate):
11.97 lb
Shipping weight6.80 kg
Package size577 × 505 × 91 mm

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What does the 10GBase-X uplink standard cap the four SFP+ ports at in practice?

The four SFP+ uplink slots run at 10 Gigabit Ethernet speeds, so each port is capped at 10 Gbps when populated with compatible transceivers.

What rack depth and clearance does the 1U, 13.8-inch deep chassis need to mount properly?

The switch fits a standard 1U rack space and requires at least 13.8 inches of usable depth plus cable-bend room behind the front posts.

How is the 370 W PoE budget allocated across the 48 PoE+ ports during initial setup?

The 370 W budget is shared dynamically; the switch negotiates per-port power via LLDP-MED or CDP, so ports only draw what each attached device requests.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.