We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact stubby air impact wrench, composite housing, 1/2 inch drive, 4.8 inches long, grey and black finish

Capri Tools

Capri Tools hydraulic power

SKU CH-YZH0-2Q2JV

A compact 1/2 in. stubby air impact wrench delivers 450 ft.-lb. reverse torque and 400 ft.-lb. forward torque in a 4.8 in. body weighing 2.86 lbs.

  • Ultra-compact 4.8 in. body reaches cramped fasteners
  • 450 ft.-lb. reverse torque breaks stubborn bolts
  • Low 6.8 m/s² vibration cuts operator fatigue
  • Quiet 91.1 dBA operation protects hearing
  • 2 CFM air use saves compressor capacity

Compact Stubby Impact Wrench

The Capri Tools CP35105 is a 1/2 inch drive air impact wrench built for mechanics who need maximum torque in tight engine bays. Its 4.8 inch body reaches fasteners that standard guns cannot. The tool delivers 450 ft-lb of reverse torque and 400 ft-lb of forward torque for heavy-duty loosening and tightening. A forward/reverse toggle and three-speed power dial give one-hand control over six power settings.

Low Vibration Quiet Operation

Vibration measures 6.8 m/s2 to reduce operator fatigue during extended use. Sound output is rated at 91.1 dBA for a quieter workshop environment. Air consumption is 4.2 CFM at 90 PSI, allowing efficient operation with smaller compressors. The composite housing keeps weight down to 2.86 lbs while resisting shop chemicals and impacts.

Composite Housing And NPT Inlet

The lightweight composite body withstands daily drops and exposure to solvents without cracking. A 1/4 inch NPT air inlet connects to standard shop hoses without adapters. The stubby length improves access between frame rails and suspension components. Buyers needing higher torque for industrial fleets or integrated torque monitoring should consider larger models.

Highlights

  • Ultra-compact 4.8 in. body reaches cramped fasteners
  • 450 ft.-lb. reverse torque breaks stubborn bolts
  • Low 6.8 m/s² vibration cuts operator fatigue
  • Quiet 91.1 dBA operation protects hearing
  • 2 CFM air use saves compressor capacity

Specifications

BrandCAPRI TOOLS

Questions about this item

How do I connect the 1/4 in. NPT air inlet to my compressor without leaks?

Wrap PTFE tape on the male threads, hand-tighten the fitting, then snug it with a wrench one turn; the 4.2 CFM at 90 PSI rating means even a small leak drops torque noticeably.

Which internal parts wear first and need replacement on this impact wrench?

The vanes and rotor bearings inside the air motor wear with use; the low 6.8 m/s² vibration spec indicates tight tolerances, so plan a vane kit and bearing refresh after heavy service intervals.

At what point does the 450 ft.-lb. reverse torque drop off during continuous bolt-breaking?

Sustained runs draw the full 4.2 CFM; if your compressor cannot maintain 90 PSI, torque falls below the 450 ft.-lb. peak within the first few seconds of a hard pull.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.