We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

CAFELE

CAFELE AD0812XB-A73GL 80×80×25mm 12V 0.55A 3-wire case fan

SKU CH-JM1W-VYRV1 MPN AD0812XB-A73GL

12 V, 0.55 A, 80 × 80 × 25 mm case fan with three-wire speed reporting

  • TypeCase Fan
  • Compact 80×80×25mm frame fits tight chassis spaces
  • 12V 0.55A draw keeps power use low
  • 3-wire connector enables speed monitoring
  • ADDA 8025 design built for reliable airflow
  • Original replacement part restores cooling performance

80×80×25mm 12V chassis fan

The CAFELE AD0812XB-A73GL is an 80×80×25mm case fan designed for chassis airflow. It runs on 12V and draws 0.55A through a standard three-wire connection. The ADDA 8025 frame fits typical 80mm mounting points in desktop enclosures.

Three-wire 12V 0.55A power interface

The single specification that decides fit is the three-wire 12V 0.55A power interface. Your motherboard or fan controller must supply 12V and accept a three-pin connector with a 0.55A current draw. Mismatched voltage or pin count will prevent the fan from operating.

Continuous 12V 0.55A operation

Under sustained load the fan maintains its rated 12V 0.55A draw without exceeding the specified current. The three-wire connection reports speed to the system while delivering steady power. Thermal performance remains consistent as long as the supply voltage stays at 12V.

Highlights

  • Compact 80×80×25mm frame fits tight chassis spaces
  • 12V 0.55A draw keeps power use low
  • 3-wire connector enables speed monitoring
  • ADDA 8025 design built for reliable airflow
  • Original replacement part restores cooling performance

Specifications

TypeCase Fan

Questions about this item

What does the 0.55 A current draw mean for my fan header?

At 12 V the fan pulls 0.55 A, so a standard 3-pin motherboard header rated for 1 A will run it with headroom.

How does the 3-wire connection affect speed control?

The three wires provide power, ground and a tachometer signal; the motherboard can monitor RPM but cannot vary voltage for PWM control.

Will the 80×80×25 mm frame fit my case fan slot?

The housing is 80 mm square and 25 mm thick, matching the 8025 mounting pattern used in most 80 mm case openings.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.