We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10 ft Mini DisplayPort 1.2 to HDMI 1.4 cable

Cables To Go

Cables To Go 54437 Mini DisplayPort 1.2 to HDMI 1.4 cable 10 ft

SKU CH-FK0A-KMJKK MPN 54437

Connects Mini DisplayPort 1.2 sources to HDMI 1.4 displays at 3840 x 2160 resolution over 10 ft

  • TypeConsumer Electronics
  • Connect 4K displays with Mini DisplayPort 1.2 and HDMI 1.4 support
  • Passive plug-and-play design works instantly with notebooks, HDTVs and projectors
  • 10 ft length gives flexible routing between devices
  • Supports 3840 x 2160 resolution for sharp Ultra HD video
  • Lifetime limited warranty backs the cable for long-term use

10 ft Mini DisplayPort 1.2 to HDMI 1.4 Cable

This passive cable connects a Mini DisplayPort 1.2 source to an HDMI 1.4 display. It supports digital audio and video transmission up to 3840 x 2160 resolution. The 10 ft length suits notebook-to-HDTV or projector setups. Plug-and-play operation requires no external power or drivers.

Passive Adapter Limits

The passive design relies on the source device to output a compatible HDMI signal through the Mini DisplayPort interface. It does not actively convert DisplayPort protocol to HDMI protocol. Maximum supported resolution is 3840 x 2160 as defined by the HDMI 1.4 connector specification. Audio pass-through depends on the source device capabilities.

Check Source Port Compatibility

Verify your notebook or device has a Mini DisplayPort 1.2 port that supports DP++ dual-mode output. This cable will not work with standard DisplayPort-only ports lacking dual-mode support. Confirm the display accepts HDMI 1.4 input for the desired resolution. The cable is unidirectional from Mini DisplayPort source to HDMI display only.

Highlights

  • Connect 4K displays with Mini DisplayPort 1.2 and HDMI 1.4 support
  • Passive plug-and-play design works instantly with notebooks, HDTVs and projectors
  • 10 ft length gives flexible routing between devices
  • Supports 3840 x 2160 resolution for sharp Ultra HD video
  • Lifetime limited warranty backs the cable for long-term use

Specifications

BrandC2G-Kvm & Networking
TypeConsumer Electronics
Shipping weight0.91 kg
Package size254 × 152 × 13 mm

Questions about this item

Should I choose the 10 ft length or a shorter cable for my setup?

The 10 ft length gives you extra reach between a notebook and an HDTV or projector; pick a shorter cable only if the devices sit closer together to avoid excess slack.

What does the 3840 x 2160 resolution figure mean when I connect my laptop to a 4K display?

It means the cable can carry a 4K UHD signal from a Mini DisplayPort 1.2 source to an HDMI 1.4 display, so you get the full 3840 x 2160 pixel grid without scaling.

How do the Mini DisplayPort 1.2 and HDMI 1.4 ends affect what I can actually run?

The Mini DisplayPort 1.2 source and HDMI 1.4 sink define the link; the passive cable passes whatever signal both ends negotiate, up to the 3840 x 2160 resolution listed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.