Cables To Go
Cables To Go 50218 VGA cable 50 ft
A 50 ft VGA cable with CMG-rated jacket for in-wall runs and all 15 pins wired for DDC2 and EDID support
- TypeCable Connectors
- ColorBlack
- Length50 ft
- Connector Number1
- Connector DetailConnector on First End:1 x HD-15 Male VGA Connector on Secon
- SpecificationsDevice Supported:Monitor Video Device
- 50 ft length reaches distant displays
- CMG-rated jacket approved for in-wall runs
- Low-profile connectors fit tight projector mounts
- All 15 pins wired for DDC2 and EDID
- Supports up to 2048 x 1536 resolution
50 ft VGA cable for long runs
This 50 ft VGA cable connects a computer or video source to a monitor using male HD-15 connectors on both ends. The CMG-rated jacket meets in-wall fire safety requirements for commercial installations. Low-profile connectors fit tight spaces such as projector mount poles. All 15 pins are wired to carry DDC2 and EDID data so the display can negotiate its optimal resolution automatically.
In-wall routing and tight-space fitting
The CMG-rated jacket allows the cable to be pulled through walls and ceilings without additional conduit in many jurisdictions. Rounded low-profile connector housings clear narrow openings and crowded back-plates more easily than bulky moulded plugs. Secure the cable with gentle-radius bends; sharp kinks can damage the internal conductors over a 15.24 m run. Verify that the installation path stays within the rated temperature range for CMG cable.
Resolution and distance limits to confirm
The cable supports resolutions up to 2048x1536 at 50 ft, but signal quality can degrade beyond the manufacturer's 150 ft design target. Ensure the source device outputs a compatible analogue VGA signal and that the display accepts the same timing through its HD-15 input. Check that both ends have clearance for the straight HD-15 plugs; right-angle adapters may be needed in extremely shallow recesses. The 1.84 kg weight requires adequate support along long vertical drops.
Highlights
- 50 ft length reaches distant displays
- CMG-rated jacket approved for in-wall runs
- Low-profile connectors fit tight projector mounts
- All 15 pins wired for DDC2 and EDID
- Supports up to 2048 x 1536 resolution
Specifications
| Brand | C2G |
|---|---|
| Model | 50218 |
| Type | Cable Connectors |
| Color | Black |
| Length | 50 ft |
| Connector Number | 1 |
| Connector Detail | Connector on First End:1 x HD-15 Male VGA Connector on Second End:1 x HD-15 Male VGA |
| Specifications | Device Supported:Monitor Video Device |
| Features | Cable Type: VGACable Length: 50 ftConnector on First End: 1 x 15-pin HD-15 Male VGAConnector on Second End: 1 x 15-pin HD-15 Male VGADevice Supported: Video Device,MonitorColor: BlackWeight (Approximate): 1.84 kgLimited Warranty: Lifetime |
| Cable Length | 0.5 ft. |
| Shipping weight | 1.84 kg |
| Package size | 191 × 191 × 76 mm |
Questions about this item
How can I confirm the cable is passing the full 2048x1536 resolution after installation?
Connect a monitor and source that both support 2048x1536, then verify the display settings show that resolution and the EDID information matches the monitor model.
What comes with the 50 ft VGA cable and is any extra hardware required for in-wall use?
The box contains the cable with HD-15 male connectors on both ends; the CMG-rated jacket is built-in, so no additional conduit or jacket is needed for in-wall runs.
Which length should I choose if my projector is 50 feet from the computer?
The 50 ft model matches that distance exactly; shorter or longer versions exist but this part number covers 50 ft.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
YOUHUA SATA Cable Kit 2×Data 0.48 m 2×Power 0.16 m
- Sata cables: 2 SATA…
Micro Connectors SATA cable 40 inches straight to right angle locking latch black 3 pack
- Black



