We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five short red SATA cables with locking connectors

CableCreation

CableCreation 5-Pack SATA III 6.0 Gbps 8-inch Female to Female Locking Latch Red

SKU CH-WVBR-14CS7

Five SATA III cables with locking latches, 8 inches long for compact builds, supporting 6.0 Gbps throughput

  • 6 Gbps throughput with SATA 3.0 revision
  • Backward compatible with SATA 1 and 2 standards
  • 8-inch length fits Mini-ITX and NUC builds
  • Locking latches prevent accidental disconnection
  • Five cables included for multiple drive connections

5-Pack SATA III Locking Cables

This set contains five red SATA III cables rated for 6.0 Gbps throughput. Each cable uses a 7-pin female-to-female layout with a locking latch on both ends. The 8-inch length suits tight chassis such as Mini ITX builds and Intel NUC units. They are backward compatible with SATA revision 1 and 2 devices.

Builders with compact cases and locking ports

The short reach and secure latches help cable routing in small-form-factor systems where vibration or cramped space might dislodge standard plugs. Buyers needing longer runs for full-tower cases or external eSATA connections should look at different cable lengths or connector styles.

Locking latches prevent accidental disconnects

The integrated latch on each connector clicks into place, keeping the link stable during transport or when adjacent components press against the cable. The red jacket makes the cables easy to identify among other wiring. No additional software or adapters are included in the pack.

Highlights

  • 6 Gbps throughput with SATA 3.0 revision
  • Backward compatible with SATA 1 and 2 standards
  • 8-inch length fits Mini-ITX and NUC builds
  • Locking latches prevent accidental disconnection
  • Five cables included for multiple drive connections

Specifications

No published specifications for this item yet.

Questions about this item

What motherboard or controller connector do I need to plug these 7-pin female SATA cables into?

You need a standard 7-pin male SATA port on the motherboard or host controller for each cable end.

Will these SATA 3.0 cables work with my older SATA I or SATA II hard drives and optical drives?

Yes, the cables are backwards compatible with SATA revision 1 and 2 devices at their native speeds.

How can I verify the locking latches are engaged after I connect the cables inside my Mini ITX build?

Push each connector until the latch clicks audibly and the cable resists a gentle pull.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.