We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cable Leader

Cable Leader Cat6a Shielded Ethernet Cable 50ft Blue F/UTP 24AWG 500MHz 10GBASE-T

SKU CH-2ZQZ-M9EHP

Shielded Cat6a patch cable delivers 10 Gigabit Ethernet over 50 ft with F/UTP foil shielding, 24 AWG bare copper and gold-plated RJ45 contacts

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length50 ft.
  • ColorBlue

Length 50ft

  • 10 Gbps wired speed at 500 MHz over 100 m
  • F/UTP foil shield blocks EMI in dense racks
  • 24 AWG bare copper with 50 µm gold contacts
  • Snagless boot protects clips during patch-panel routing
  • Backward compatible with Cat6 and Cat5e networks

50 ft Cat6a shielded patch cable

This 50 ft Cat6a shielded Ethernet cable delivers a 10 Gigabit wired connection using F/UTP foil shielding around all four twisted pairs. It uses 24 AWG bare copper conductors and 50-micron gold-plated RJ45 contacts for low-resistance signal integrity. The snagless molded boot protects the locking clip during routing in dense racks or patch panels. It is suited for data centres, server rooms and PoE+ runs near power and machinery.

Upgrade from Cat6 or Cat5e for 10GBASE-T

The cable supports 10GBASE-T up to 100 m at 500 MHz and is fully backward compatible with Cat6 and Cat5e for a drop-in upgrade. The jump is worth it when you need 10 Gbps throughput over longer runs or when EMI and alien crosstalk from dense bundles or nearby power cables degrade unshielded links. It replaces unshielded patch cables in noise-sensitive environments where foil shielding keeps data clean.

Simple RJ45 plug-in with snagless boot

Installation is a direct RJ45 plug into switches, routers, patch panels, PoE+ injectors, IP cameras, servers, NAS units or workstations. The snagless boot prevents the clip from catching on adjacent cables during routing and re-patching. What usually goes wrong is damaged locking clips on standard boots or using unshielded cable where EMI corrupts high-speed signals. The foil shield must remain intact along the full length.

Highlights

  • 10 Gbps wired speed at 500 MHz over 100 m
  • F/UTP foil shield blocks EMI in dense racks
  • 24 AWG bare copper with 50 µm gold contacts
  • Snagless boot protects clips during patch-panel routing
  • Backward compatible with Cat6 and Cat5e networks

Specifications

BrandGENERIC
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length50 ft.
ColorBlue
ShieldedYes
Wire Gauge24 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What clearance does the 50 ft F/UTP cable with its snagless molded boot need behind a patch panel?

The snagless molded boot protects the locking clip during routing, so allow enough depth for the boot plus the 50 ft length to bend without kinking when dressed into a dense rack or patch panel bundle.

How do you seat the RJ45 plugs on this shielded Cat6a cable so the foil shield stays effective?

Push each 8P8C plug until the locking tab clicks; the 50‑micron gold contacts and F/UTP foil around all four pairs maintain EMI rejection only when the connector is fully seated in the jack.

When should the 24 AWG bare‑copper Cat6a cable be replaced in a PoE+ installation?

Replace the cable if the jacket shows cuts, the boot tears, or the gold‑plated contacts discolor, since damage to the foil shield or conductors degrades 10GBASE‑T and PoE+ performance.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.