We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White ultra-slim 4.0mm Cat6a Ethernet cable, 5ft, RJ45 connectors, transparent snagless boots

Cable Leader

Cable Leader Cat6a 5ft Slim Ethernet Cable White 28AWG 4.0mm 500MHz 10GBASE-T

SKU CH-3DXV-J26XW

A slim 4.0 mm Cat6a patch cable delivers 10 Gigabit Ethernet up to 100 m at 500 MHz while fitting dense racks and improving airflow

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length5 ft.
  • ColorWhite

Length 5ft

Show 7 more configurations

Color White

  • Ultra-slim 4.0mm jacket improves airflow in dense racks
  • 10GBASE-T support at 500MHz up to 100m for 10 Gigabit speeds
  • 28AWG bare copper with 50-micron gold contacts ensures reliable signal integrity
  • Snagless boot protects locking clip during frequent re-patching
  • Backward compatible with Cat6 and Cat5e for drop-in upgrades

Ultra-slim Cat6a patch cable for dense racks

This five-foot white cable meets the Cat6a standard and carries 10GBASE-T traffic at 500 MHz up to 100 metres. Its 28 AWG bare-copper conductors and 4.0 mm jacket are far thinner than typical 6.9 mm cords, so more links fit in each rack unit and airflow improves around switches and servers.

Snagless boot and gold contacts simplify

A transparent slim boot protects the locking clip from catching on neighbouring cables during routing or re-patching. The 8P8C RJ45 plugs use 50-micron gold-plated contacts for low-resistance, corrosion-resistant connections, and the four twisted pairs keep crosstalk low in tight bundles.

Not for runs that require shielded

Buyers who need foil or braid shielding for noisy environments, or solid-conductor cable for permanent in-wall pulls, should choose a different construction. This unshielded, stranded 28 AWG patch cord is built for patch-panel, server-rack and data-centre patching where flexibility and density matter most.

Highlights

  • Ultra-slim 4.0mm jacket improves airflow in dense racks
  • 10GBASE-T support at 500MHz up to 100m for 10 Gigabit speeds
  • 28AWG bare copper with 50-micron gold contacts ensures reliable signal integrity
  • Snagless boot protects locking clip during frequent re-patching
  • Backward compatible with Cat6 and Cat5e for drop-in upgrades

Specifications

BrandGENERIC
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length5 ft.
ColorWhite
ShieldedNo
Wire Gauge28 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I confirm the 10GBASE-T link is running at 500 MHz after plugging in the 5 ft slim Cat6a cable?

Check the switch or NIC status LEDs for a 10 Gbps indication, then run a throughput test such as iperf3; sustained speeds near 10 Gbit/s show the 500 MHz Cat6a channel is performing correctly.

What comes in the box with the white 4.0 mm OD Cat6a patch cord and what must I buy separately?

The box contains only the 5 ft 28 AWG bare copper UTP cable with 50-micron gold-plated RJ45 plugs and transparent slim snagless boots; no additional hardware or tools are included.

When should I choose the 5 ft white slim Cat6a over a longer or standard 6.9 mm jacket version?

Pick the 5 ft slim cable for short, high-density runs in patch panels, server racks or data center cabinets where the 4.0 mm jacket saves space, eases routing and improves airflow.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.