We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black six-foot locking power cord with twist-lock NEMA L6-30P plug and C13 connector, SJT jacket

Cable Leader

Cable Leader 6ft NEMA L6-30P to C13 Locking Power Cord 14 AWG 10A 125V Black

SKU CH-EXG2-MBVF9

A 6 ft locking cord connects servers or PDUs to a twist-lock outlet with 14 AWG copper rated 10 A at 125 V and UL/CSA certification

  • ColorBlack
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge14 AWG

Length 6ft

  • Twist-lock plug prevents accidental disconnection in racks
  • 14 AWG SJT cable rated 10A 125V for server and PDU power
  • UL Listed and CSA certified file 210037 with RoHS compliance
  • Black jacket enables colour-coded circuit organisation in data centres
  • 6 ft length reaches equipment from locking outlets

Secure Rack Power

This six-foot cord connects a NEMA L6-30P twist-lock plug to a standard C13 inlet, providing a vibration-resistant link for servers and power distribution units in data-centre racks. The locking mechanism prevents accidental disconnection during maintenance or equipment movement. It is built for IT professionals who need reliable, permanent power feeds in dense cabinet environments.

Check Outlet And Load

Verify that your power source presents a matching NEMA L6-30P receptacle rated for the intended voltage and that the connected equipment draws no more than the cord's rated capacity. The 14 AWG SJT jacketed cable carries a 105°C temperature rating and a 300 V insulation rating for safe operation in warm aisles. Ensure the C13 inlet on the device accepts a grounded three-conductor plug.

Certified Construction

UL Listing and CSA certification under file E210037 confirm compliance with North American safety standards, while RoHS compliance restricts hazardous substances in the materials. The heavy-duty 14 AWG copper conductors support up to 15 A for server and PDU loads, exceeding the cord's own 10 A nameplate rating for additional margin. The black SJT jacket aids circuit identification in colour-coded rack installations.

Highlights

  • Twist-lock plug prevents accidental disconnection in racks
  • 14 AWG SJT cable rated 10A 125V for server and PDU power
  • UL Listed and CSA certified file 210037 with RoHS compliance
  • Black jacket enables colour-coded circuit organisation in data centres
  • 6 ft length reaches equipment from locking outlets

Specifications

BrandGENERIC
ColorBlack
Length5 - 10 ft.
Connector Number2
Wire Gauge14 AWG

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 6 ft cord arrive ready to use or do I need to buy any extra connectors?

The cord ships with both the NEMA L6-30P twist-lock plug and the C13 connector already moulded on, so nothing else is required for a standard server or PDU connection.

I see 14 AWG listed — how does that compare with the 16 AWG and 12 AWG options in the gauge guide?

The 14 AWG wire supports up to 15 A, sitting between the 16 AWG limit of 13 A for computers and the 12 AWG limit of 20 A for heavy-duty 20 A equipment.

The label says 10 A / 125 V — what does that mean when the cord is plugged into a live rack PDU?

The cord is rated for a continuous 10 A draw at 125 V, with a 105 °C / 300 V SJT jacket, so it will safely carry the full rated load inside a locked rack outlet.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.