We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 15 ft locking power cord with twist-lock L6-30P plug and C13 connector, thick SJT jacket

Cable Leader

Cable Leader 15ft NEMA L6-30P to C13 Locking Power Cord 14 AWG 10A 125V Black

SKU CH-AJ2D-Q3926

A 15 ft twist-lock cord connects a NEMA L6-30P outlet to a C13 inlet with 14 AWG copper rated 10 A at 125 V, UL listed and CSA certified for rack and PDU use

  • ColorBlack
  • Length11 - 15 ft.
  • Connector Number2
  • Wire Gauge14 AWG

Length 15ft

  • Twist-lock L6-30P plug prevents accidental disconnection in racks
  • 14 AWG SJT cable supports 10A at 125V for server loads
  • UL Listed and CSA certified (file E210037) with RoHS compliance
  • Black jacket aids circuit identification in data centres
  • 15 ft length reaches equipment from locking PDU outlets

Secure rack power

This 15 ft locking power cord connects a NEMA L6-30P plug to a C13 inlet, so servers and PDUs stay powered even when racks vibrate or cables are tugged. The twist-lock mechanism prevents accidental disconnection in dense data-centre rows. It is built for equipment that demands a fixed, grounded link from a locking outlet.

Heavy-duty 14 AWG cable

A 14 AWG SJT jacket carries three copper conductors rated 10 A at 125 V with a 105 °C / 300 V insulation rating. The thicker gauge supports higher-draw gear that lighter 16 or 18 AWG cords cannot handle safely. UL and CSA certifications (file E210037) plus RoHS compliance confirm the materials meet recognised safety standards.

Black jacket for circuit ID

The black sheath lets installers colour-code power paths at a glance, reducing wiring errors during maintenance. Two connectors — locking plug on one end, standard C13 on the other — fit directly into common rack PDUs and server power supplies without adapters. Buyers needing non-locking plugs or different inlet types will need a separate cable.

Highlights

  • Twist-lock L6-30P plug prevents accidental disconnection in racks
  • 14 AWG SJT cable supports 10A at 125V for server loads
  • UL Listed and CSA certified (file E210037) with RoHS compliance
  • Black jacket aids circuit identification in data centres
  • 15 ft length reaches equipment from locking PDU outlets

Specifications

BrandGENERIC
ColorBlack
Length11 - 15 ft.
Connector Number2
Wire Gauge14 AWG

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How often will the 14 AWG SJT jacket need inspection or replacement in a rack?

The cable carries a lifetime warranty from the US-based brand; if it ever fails it is replaced, so no scheduled jacket replacement is required.

What stops the cord from delivering more than its 10 A rating under sustained load?

The 14 AWG copper conductors and SJT 105 °C / 300 V rating limit continuous current to 10 A at 125 V.

How much heat does the 15 ft cord add when it runs all day at full load?

At the rated 10 A the 14 AWG copper produces minimal resistive heat; the SJT jacket is rated for 105 °C continuous operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.