We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10 ft twist-lock power cord with NEMA L6-30P plug and C13 connector

Cable Leader

Cable Leader 10ft NEMA L6-30P to C13 Locking Power Cord 14 AWG 10A 125V Black

SKU CH-XGD1-NZHV7

A 10 ft locking power cord with a twist-lock NEMA L6-30P plug and C13 connector, built from 14 AWG SJT cable rated for 10 A at 125 V and UL listed for server and PDU racks

  • ColorBlack
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge14 AWG

Length 10ft

  • Twist-lock plug prevents accidental disconnection in racks
  • 14 AWG copper conductors rated 10A at 125V
  • SJT jacket withstands 105°C and 300V rating
  • UL Listed and CSA certified for safety compliance
  • Black jacket simplifies circuit identification in dense installations

Locking L6-30P to C13 cord

This 10-foot power cord connects servers and PDUs to a locking NEMA L6-30P outlet. The twist-lock plug secures the connection so it cannot be pulled loose in a rack or under vibration. It uses 14 AWG SJT-jacketed copper rated at 10A and 125V.

Rack builders needing secure power

The cord suits data-centre racks and server rooms where accidental unplugging must be prevented. It is not for buyers who need a standard non-locking IEC cable or a different plug type for wall outlets. The black jacket helps identify circuits in dense installations.

Sustained load with 14 AWG copper

The 14 AWG conductors are rated up to 15A for continuous server and PDU loads. The SJT jacket withstands 105C and 300V, so the cable handles steady current without overheating. UL Listed and CSA certified (file 210037) with RoHS compliance.

Highlights

  • Twist-lock plug prevents accidental disconnection in racks
  • 14 AWG copper conductors rated 10A at 125V
  • SJT jacket withstands 105°C and 300V rating
  • UL Listed and CSA certified for safety compliance
  • Black jacket simplifies circuit identification in dense installations

Specifications

BrandGENERIC
ColorBlack
Length5 - 10 ft.
Connector Number2
Wire Gauge14 AWG

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Do I already need a NEMA L6-30R receptacle to plug this L6-30P cord into?

Yes — the twist-lock L6-30P plug only mates with a matching L6-30R outlet, typically found on rack PDUs or data-centre power strips.

Will the C13 end still fit the standard C14 inlet on my older server or switch?

Yes — the C13 connector is the industry-standard mate for any C14 inlet, so legacy gear with a C14 socket plugs in directly.

How can I confirm the cord is seated and locked after I connect it?

Insert the L6-30P plug, twist clockwise until it stops; the locking tabs engage with an audible click and the plug cannot be pulled straight out.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.