We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green Cat6a Ethernet cable, 6 ft, ultra-slim 4.0 mm jacket with snagless RJ45 connectors

Cable Leader

Cable Leader 6ft Cat6a Ethernet Cable Slim 4.0mm 28AWG Green

SKU CH-N5HS-MV1VH

An ultra-slim 4.0 mm Cat6a patch cable delivering 10 Gbps at 500 MHz over 100 m with 28 AWG bare copper, gold-plated RJ45 contacts and a snagless boot for dense racks

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length6 ft.
  • ColorGreen

Length 6ft

Show 7 more configurations

Color Green

  • 10GBASE-T up to 100m at 500MHz on Cat6a
  • Ultra-slim 4.0mm jacket saves rack space and improves airflow
  • 28AWG bare copper with 50-micron gold-plated RJ45 contacts
  • Snagless transparent boot protects locking clip in dense bundles
  • Backward compatible with Cat6 and Cat5e for drop-in upgrades

Ultra-slim 4.0 mm Cat6a patch cable

This six-foot Cat6a Ethernet cable uses a 28 AWG bare-copper construction and a 4.0 mm jacket to deliver 10 GBASE-T performance up to 100 metres at 500 MHz. It is designed for network engineers and data-centre operators who need high-density connectivity in green for easy cable identification. The slim profile fits tight patch-panel spacing where standard 6.9 mm cords cannot.

Snagless boot eases dense rack routing

A transparent slim snagless boot protects the locking clip during routing and re-patching, preventing accidental disconnects in crowded cabinets. Gold-plated RJ45 contacts on both ends ensure low-resistance connections. Installers should verify that 28 AWG conductors meet their project specifications, as the thinner gauge may not suit every PoE budget or structural-cabling standard.

500 MHz Cat6a rating for 10 GBASE-T

The cable is rated at 500 MHz and supports 10 GBASE-T over the full 100-metre channel, making it the decisive specification for 10 Gigabit Ethernet drops. It remains backward compatible with Cat6 and Cat5e equipment for straightforward upgrades. Buyers who require shielded construction or a heavier gauge for permanent in-wall runs should select a different cable type.

Highlights

  • 10GBASE-T up to 100m at 500MHz on Cat6a
  • Ultra-slim 4.0mm jacket saves rack space and improves airflow
  • 28AWG bare copper with 50-micron gold-plated RJ45 contacts
  • Snagless transparent boot protects locking clip in dense bundles
  • Backward compatible with Cat6 and Cat5e for drop-in upgrades

Specifications

BrandGENERIC
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length6 ft.
ColorGreen
ShieldedNo
Wire Gauge28 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How can I verify the cable is delivering 10 Gigabit speeds after installation?

Connect the cable between 10GBASE-T capable ports and confirm the link negotiates at 10 Gbps in your switch or server interface; the 500 MHz Cat6a rating supports full 100 m runs at that speed.

What comes with the cable and is anything else required for a patch panel install?

The package contains the 6 ft green Cat6a patch cord with RJ45 plugs on both ends; no additional parts are needed for standard patch panel or keystone jack connections.

Which length should I choose for a typical server rack run?

The 6 ft length suits short intra-rack links; for longer runs up to 100 m select a longer Cat6a cable from the same series.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.