We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray 10 ft power cord with NEMA 5-15P plug and C13 connector, SJT jacket

Cable Leader

Cable Leader 10ft NEMA 5-15P to C13 14 AWG 15A 125V Gray computer power cord

SKU CH-WYF4-2YK9S

A 10 ft heavy-duty 14 AWG power cord with a grounded NEMA 5-15P plug and IEC C13 connector, rated 15A at 125V with UL and CSA certification

  • ColorGray
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge14 AWG

Length 10ft

  • 10 ft reach lets you place equipment away from the outlet
  • 14 AWG heavy-duty copper carries up to 15 A for servers and PDUs
  • Fully molded 3-wire grounded design protects against shock
  • UL Listed and CSA certified (file E210037) meets safety standards
  • SJT jacket rated 105 °C / 300 V resists heat and wear

Power cord for computers and monitors

This 10 ft Cable Leader cord connects a PC, monitor, server, printer or other IEC C13 inlet device to a standard NEMA 5-15P wall outlet, power strip or PDU. It uses heavy duty 14 AWG SJT-jacketed three-conductor copper rated 15A at 125V and 105C with a 300V cable rating. Fully molded connectors and strain relief provide a true three-wire grounded connection. The cord is UL Listed and CSA certified (file E210037) and RoHS compliant.

Suits higher-draw equipment needing a grounded 15A

Builders wiring servers, PDUs or other gear that requires up to 15A at 125V will match the 14 AWG rating correctly. Users with only light electronics drawing 10A or less could use a thinner 18 AWG cord, while standard desktop PCs at 13A are served by 16 AWG. Installations demanding a 20A circuit must use 12 AWG cable instead, so this cord does not fit those higher-amperage needs.

14 AWG gauge supports up to 15A at 125V

The wire gauge is the single specification that decides whether this cord matches the equipment load. At 14 AWG the cord is rated for a maximum of 15A, making it appropriate for servers, PDUs and higher-draw devices on a 125V circuit. If the connected hardware requires more than 15A, a 12 AWG cord rated for 20A is necessary. If the load is 13A or below, a 16 AWG or 18 AWG cord would also work, but the 14 AWG choice gives headroom for the stated 15A ceiling.

Highlights

  • 10 ft reach lets you place equipment away from the outlet
  • 14 AWG heavy-duty copper carries up to 15 A for servers and PDUs
  • Fully molded 3-wire grounded design protects against shock
  • UL Listed and CSA certified (file E210037) meets safety standards
  • SJT jacket rated 105 °C / 300 V resists heat and wear

Specifications

BrandGENERIC
ColorGray
Length5 - 10 ft.
Connector Number2
Wire Gauge14 AWG

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 14 AWG, 15 A cord work safely with my older 10 A monitor?

Yes. The 14 AWG rating supports up to 15 A, so a 10 A monitor draws well within the cord's capacity and the fully grounded 3-wire design adds safety.

How can I confirm the cord is performing correctly after I plug it in?

Verify the molded NEMA 5-15P plug seats firmly in the outlet, the IEC 60320 C13 connector locks into the device inlet, and the equipment powers on without the cord or connectors becoming warm.

Does the package include only the 10 ft gray cord or are adapters also supplied?

Only the 10 ft NEMA 5-15P to C13 power cord is included; no extra adapters or mounting hardware are provided.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.