We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 15-foot twist-lock power cord with L6-30P and L6-30R connectors, 10 AWG SJT jacket

Cable Leader

Cable Leader 15ft NEMA L6-30P to L6-30R Locking Power Cord 10 AWG 10A 125V Black

SKU CH-093P-SPNM3

A 15-foot locking power cord with NEMA L6-30P to L6-30R connectors, 10 AWG copper conductors, 10A at 125V rating, SJT jacket, and UL and CSA certification for secure server and PDU connections

  • ColorBlack
  • Length11 - 15 ft.
  • Connector Number2
  • Wire Gauge10 AWG

Length 15ft

  • Twist-lock plug prevents accidental disconnection in racks
  • 10 AWG copper conductors handle 10A at 125V
  • SJT jacket rated 105C and 300V for durability
  • UL Listed and CSA certified for safety compliance
  • Black jacket enables colour-coded circuit identification

Locking L6-30P to L6-30R Cord

The Cable Leader 15 ft NEMA L6-30P to L6-30R locking power cord connects servers and PDUs to a matching twist-lock outlet in a data centre or server room. The locking mechanism prevents accidental disconnection caused by vibration or cable management activity. It is built for equipment that requires a secure, grounded connection from a dedicated locking receptacle.

Practical Limits of the Twist-Lock Interface

The cord uses a 10 AWG SJT jacket rated 105C and 300V with three-conductor copper, carrying 10A at 125V. The locking plug only mates with an L6-30R receptacle, so it cannot be used with standard straight-blade outlets or other NEMA configurations. Buyers who need a cord for non-locking outlets or different voltage and amperage ratings cannot use this product.

10 AWG 10A 125V Rating

The 10 AWG gauge and 10A 125V rating determine whether the cord can safely supply the connected load. Equipment drawing more than 10A at 125V requires a heavier gauge or higher-rated cord, while lighter loads can use thinner cables. The UL Listed and CSA certified construction with file E210037 confirms compliance for rack and PDU power distribution.

Highlights

  • Twist-lock plug prevents accidental disconnection in racks
  • 10 AWG copper conductors handle 10A at 125V
  • SJT jacket rated 105C and 300V for durability
  • UL Listed and CSA certified for safety compliance
  • Black jacket enables colour-coded circuit identification

Specifications

BrandGENERIC
ColorBlack
Length11 - 15 ft.
Connector Number2
Wire Gauge10 AWG

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I pick a different AWG for my server rack?

The 10 AWG gauge supports 10A at 125V; the supplier guide shows 14 AWG for 15A servers and 12 AWG for 20A equipment, so choose based on your circuit rating.

What does the 10A 125V rating mean when the cord is plugged into a PDU?

It means the cable can continuously carry 10 amps at 125 volts without overheating, matching the 10 AWG copper and 300V SJT jacket rating.

How does the NEMA L6-30 twist-lock limit what I can connect?

The L6-30P plug only mates with an L6-30R locking receptacle, so the cord works only with outlets wired for that 30A twist-lock standard.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.