We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four black and blue braided SATA cables, straight to right-angle connectors, one metre each

BUCIER

BUCIER SATA-III Cable 1M 4-Pack Right-Angle 6Gbps

SKU CH-PN12-12GRN

A four-pack of one-metre SATA III data cables with straight-to-90-degree connectors, 6 Gbps speed and nylon braiding for tidy routing

  • TypeSATA Cables
  • ColorBlack/Blue
  • Length3.3
  • Speed6 gigabytes_per_second
  • Conductornylon
  • FeaturesData Transfer
  • 6 Gbps transfer speed backed by SATA III specification
  • 1 metre length gives 3.3 feet of reach for server chassis
  • 90-degree right-angle connector eases routing in tight spaces
  • Nylon braided 30 AWG conductors reduce clutter for clean cable management
  • Four labelled cables in one pack simplify RAID and multi-drive setups

Right-Angle SATA-III 4-Pack

This set contains four SATA-III data cables, each 1 metre (3.3 ft) long, with a straight connector on one end and a 90-degree right-angle connector on the other. They link SATA 7-pin drives such as SSDs, HDDs, optical drives or RAID controllers to a motherboard or host controller. The cables carry data only and do not supply power.

Thin Braided Build for Airflow

Each cable uses 30 AWG conductors wrapped in a nylon braid that keeps the four leads tidy in tight server or workstation chassis. The slim profile reduces obstruction to airflow compared with standard moulded cables. Rated for 6 Gbps transfer, actual throughput depends on the attached drive and controller. Backwards compatible with SATA I and SATA II devices.

Labeled Leads Simplify RAID Wiring

Connectors P1 through P4 are marked for quick identification when routing multiple drives in a RAID array or multi-bay enclosure. Locking latches on every plug secure the connection against vibration in rack-mounted gear. Buyers who need internal power cables or external eSATA brackets will not find them in this pack.

Highlights

  • 6 Gbps transfer speed backed by SATA III specification
  • 1 metre length gives 3.3 feet of reach for server chassis
  • 90-degree right-angle connector eases routing in tight spaces
  • Nylon braided 30 AWG conductors reduce clutter for clean cable management
  • Four labelled cables in one pack simplify RAID and multi-drive setups

Specifications

BrandADCAUDX
ModelSATA-011
TypeSATA Cables
ColorBlack/Blue
Length3.3
Speed6 gigabytes_per_second
Conductornylon
FeaturesData Transfer

Questions about this item

How do I install the 90-degree SATA connectors and which step do people get wrong?

Connect the straight end to the motherboard or controller and the right-angle end to the drive, ensuring each locking latch clicks into the 7-pin port; the common mistake is forcing the angled plug without aligning the latch, which can bend the pins.

What maintenance or replacement will these cables need later?

The nylon-braided 30 AWG conductors are passive and require no scheduled maintenance; replace a cable only if the latch breaks, the braid frays, or data errors appear after reseating both ends.

What limit shows up first under sustained use?

The practical throughput ceiling is the 6 Gbps SATA III rating of the cable assembly, so sustained transfers cannot exceed that bandwidth regardless of the attached drive or controller speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.