We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A .5 m SATA cable with two 90-degree connectors, braided sleeve, labelled ends

BUCIER

BUCIER SATA cable double 90° 7-pin SAS 6Gbps .5m

SKU CH-P8HJ-SF78H

Connects SATA drives with double 90-degree angled 7-pin connectors at 6 Gbps over 0.5 m

Cable Length 0.5m

  • 90° connectors fit tight server bays
  • .5 m length reduces cable clutter
  • SAS 6 Gbps supports fast storage arrays
  • 7-pin SATA works with 2.5" SSDs and 3.5" HDDs
  • Data-only cable — drive power supplied separately

BUCIER SATA cable double 90° 7-pin SAS 6Gbps .5m

This BUCIER cable connects motherboards and host controllers to internal SATA or SAS hard drives, SSDs and optical drives. It carries data only and does not supply power, so each drive must be powered separately. The 0.5 metre length suits tight server chassis and RAID arrays.

Sustained data transfer up to 6Gbps

The thin SAS-grade cable supports the full SATA 6Gbps specification, so throughput remains consistent during long sequential reads or writes. Actual speed is limited by the rating of the attached drive and controller. Backwards compatibility with SATA I and SATA II devices is maintained.

Double 90° angled connectors for dense layouts

Both ends feature a 90 degree SATA 7-pin female connector, allowing the cable to run parallel to the drive or motherboard in confined spaces. Four cables are bundled with nylon braiding and labelled P1 to P4 for simple routing in multi-drive or RAID configurations.

Highlights

  • 90° connectors fit tight server bays
  • .5 m length reduces cable clutter
  • SAS 6 Gbps supports fast storage arrays
  • 7-pin SATA works with 2.5" SSDs and 3.5" HDDs
  • Data-only cable — drive power supplied separately

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the .5 m length with 90° connectors help keep the cable cool when it runs all day?

The .5 m length and 90° ends reduce slack and improve airflow around the cable, so heat build-up stays minimal during continuous use.

What must I already have to use this SATA 7-pin cable with my drives?

You need a motherboard or controller with a SATA 7-pin port and a separate power cable for each drive, because this cable carries data only.

Will this 6 Gbps SAS cable work with my older SATA I and SATA II hard drives?

Yes, it is backwards compatible with SATA I and SATA II drives; the transfer speed will be limited by the drive's own rating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.