We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black PCIe 3.0 x16 extension cable, 30 cm, 180-degree female connector

BONAEVER

BONAEVER PCIe 3.0 x16 Extension Cable 30cm 180°

SKU CH-ZZXW-4CYNQ

A PCIe 3.0 x16 riser cable with a 180-degree female connector and 30 cm length for vertical GPU mounting

  • ColorBlack

Style Straight

  • Supports PCIe 3.0/2.0/1.0 for broad GPU compatibility
  • 30 cm length fits compact and open-air builds
  • 180-degree female connector aligns with vertical mounting needs
  • German patented wire with 3U gold fingers ensures stable high-frequency signals
  • Factory power-on test on every unit guarantees 100% pass rate

PCIe 3.0 x16 GPU Extension

This 30 cm cable extends a PCI Express 3.0 x16 slot so a graphics card can be mounted away from the motherboard. It is built for builders who need to reposition a GPU vertically or horizontally inside a custom loop or showcase case. The 180-degree female connector keeps the card parallel to the board.

Check slot version and clearance

Your motherboard must provide a PCIe 3.0, 2.0 or 1.0 x16 slot; the cable does not operate in 4.0 mode unless the BIOS forces the link down to Gen 3. Verify that 30 cm of routing space exists between the slot and the planned GPU position. Avoid sharp bends that degrade signal integrity.

Fits vertical or horizontal GPU mounts

The extension frees the graphics card from the motherboard slot, enabling vertical brackets, riser frames or custom water-cooling layouts. It requires a standard x16 slot on the board and a matching x16 edge connector on the card. The bolted PCB lock secures the solder joints during installation and long-term vibration.

Highlights

  • Supports PCIe 3.0/2.0/1.0 for broad GPU compatibility
  • 30 cm length fits compact and open-air builds
  • 180-degree female connector aligns with vertical mounting needs
  • German patented wire with 3U gold fingers ensures stable high-frequency signals
  • Factory power-on test on every unit guarantees 100% pass rate

Specifications

ColorBlack

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 30 cm cable ship with any mounting hardware or do I need to source bolts and nuts separately?

The PCB end is swaddled and fixed with bolts and nuts already installed, so no extra hardware is required for the solder-point reinforcement.

My motherboard only runs PCIe 3.0 — will this 16x extension work at full speed?

Yes, the cable supports PCIe 3.0, 2.0 and 1.0, so a 3.0-only board will operate at the full 3.0 rate.

I have a PCIe 4.0 graphics card — what does the 4.0 limitation note mean for real-world use?

The cable cannot run at 4.0 speeds; you must set the slot to Gen 3.0 mode in BIOS before installing the extension, after which the card will run at 3.0 performance.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.