We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 20 cm PCIe 16x riser cable with 90° connector

BONAEVER

BONAEVER PCIe 16x 90° Riser Cable 20cm

SKU CH-VEP7-AWS00

A 20 cm PCIe 16x riser cable with a 90-degree connector, supporting PCIe 3.0, 2.0 and 1.0 but not 4.0

  • ColorBlack

Style 90 Degree

  • Vertical 90° connector lets you mount the GPU in tight cases
  • Gold-plated contacts and quality solder points give reliable conductivity
  • Foiled cable design reduces EMI for stable high-frequency signals
  • Supports PCIe 3.0, 2.0 and 1.0 for broad compatibility
  • 20 cm length suits compact builds like the FD R6

Vertical 90° GPU Riser

This 20 cm PCIe 16x riser cable uses a vertical 90 degree connector to let a graphics card sit parallel to the motherboard. It supports PCIe 3.0, 2.0 and 1.0 signalling and is built with gold plated contacts and foil shielding for signal integrity. The black flexible cable is designed for tight chassis layouts such as the FD R6 case.

Builders needing vertical GPU mounting

The 90 degree plug suits small form factor cases where a straight riser would hit the side panel or drive cage. It does not carry PCIe 4.0 bandwidth, so systems that require Gen 4 throughput should use a different interconnect. Excessive bending will degrade the signal, so very sharp routing paths are not appropriate.

Fits between motherboard and GPU slot

The 20 cm length bridges the board's top PCIe x16 slot to a vertically mounted card without slack. Foil shielding reduces EMI in crowded builds, freeing up space behind the motherboard tray for cable routing. The riser needs a case with a vertical bracket and enough clearance for the card's thickness.

Highlights

  • Vertical 90° connector lets you mount the GPU in tight cases
  • Gold-plated contacts and quality solder points give reliable conductivity
  • Foiled cable design reduces EMI for stable high-frequency signals
  • Supports PCIe 3.0, 2.0 and 1.0 for broad compatibility
  • 20 cm length suits compact builds like the FD R6

Specifications

ColorBlack

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What motherboard slot and GPU interface are required to use this 16x riser cable?

The cable connects a PCIe 16x motherboard slot to a PCIe 16x graphics card, supporting PCIe 3.0, 2.0 and 1.0 speeds.

Will this 90-degree riser work with a PCIe 4.0 graphics card installed in a PCIe 3.0 motherboard slot?

The cable supports PCIe 3.0, 2.0 and 1.0; it does not support PCIe 4.0, so the link will negotiate down to 3.0 speeds.

How can I verify the riser is functioning correctly after routing it 20 cm to the GPU?

The system should POST, the GPU must appear at PCIe 3.0 x16 in device manager or GPU-Z, and no signal-loss artefacts should occur under load.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.