We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua 8-core MPO-MPO OM3 fibre patch cable 33 ft

BFKK

BFKK MPO-MPO OM3 8-Core Type B 33 ft (10M) Aqua fibre optic cable

SKU CH-YJ08-B1W40

An 8-core OM3 multimode cable with MPO female connectors in Type B polarity for QSFP+ transceivers and patch panels

Length 33 ft.

  • Low insertion loss typ. 0.3 dB at 850 nm
  • High return loss above 25 dB at 850 nm
  • 8-core OM3 multimode fibre 50/125 µm
  • Type B polarity channel 1 to channel 12
  • LSZH jacket for safer installations

8-Core OM3 Fibre Cable

This 33 ft (10 m) multimode patch cable uses 50/125 µm OM3 fibre with eight cores terminated in MPO female connectors without pins. It follows a Type B wiring map that connects channel 1 to channel 12 for QSFP+ transceiver links. The aqua LSZH jacket identifies the OM3 rating and suits indoor installations.

Installers linking QSFP+ cassettes or panels

The cable suits engineers building parallel-optic links between MPO or MTP cassettes and QSFP+ ports in patch panels or FTTH cabinets. It will not suit runs that require single-mode fibre, angled-polish connectors, pinned MPO interfaces, or a different core count than eight.

Type B polarity with <0.6 dB insertion loss

Typical insertion loss is 0.3 dB at 850 nm with a maximum of 0.6 dB, while return loss exceeds 25 dB at the same wavelength. These figures determine whether the assembly meets the loss budget for a 10 G link over the 33 ft span.

Highlights

  • Low insertion loss typ. 0.3 dB at 850 nm
  • High return loss above 25 dB at 850 nm
  • 8-core OM3 multimode fibre 50/125 µm
  • Type B polarity channel 1 to channel 12
  • LSZH jacket for safer installations

Specifications

No published specifications for this item yet.

Other versions of this model

4 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the MPO-MPO OM3 8-core Type B cable without reversing the channel order?

Connect the female MPO connectors so that Channel 1 on one end mates with Channel 1 on the other; the Type B wiring maps 1-to-12 across the 12-fibre ferrule, so verify the key orientation before pushing the latch home.

What maintenance or replacement will the LSZH-jacketed 8-core OM3 cable need over time?

Inspect the MPO ferrules for dust before each reconnect and clean with a dry-click cleaner; the LSZH jacket resists flame spread but should be replaced if kinked, crushed or if insertion loss drifts above the 0.6 dB spec.

What is the first performance limit that appears when running 10 Gbps traffic continuously over the 33 ft OM3 link?

The 850 nm insertion loss budget of 0.6 dB maximum (typical 0.3 dB) and return loss above 25 dB set the practical ceiling; sustained use stays within spec as long as connectors remain clean and unbent.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.