We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua MPO to MPO fibre cable with eight cores and LSZH jacket

BFKK

BFKK 7M OM3 8F Type-B LSZH 50/125µm MPO Fibre Optic Cable Aqua

SKU CH-800S-BJ70J

A 7-metre OM3 multimode patch cord with eight fibres in a Type-B LSZH jacket, rated for 40 G networks with typical insertion loss of 0.3 dB at 850 nm

Length 23.0 ft.

  • Low insertion loss under 0.6 dB at 850 nm
  • Typical loss of 0.3 dB ensures efficient signal transmission
  • OM3 multimode fibre supports 10G and 40G networks
  • LSZH jacket reduces toxic smoke in fire situations
  • Type B polarity maps channel 1 to channel 12 for cassette links

7-metre OM3 MPO patch cable

This 7-metre multimode cable uses OM3 50/125 µm fibre with eight cores in a Type-B polarity layout. It is built for 40G network links between MPO or MTP cassettes and QSFP+ transceivers. The aqua LSZH jacket meets low-smoke zero-halogen requirements for indoor routing.

Check connector gender and polarity before ordering

The cable carries female MPO connectors without guide pins on both ends, so the mating equipment must provide pinned male interfaces. Verify that your cassettes or transceivers expect Type-B channel mapping (channel 1 to channel 12) and that the link budget can accommodate the specified insertion loss.

Replaces shorter or lower-grade OM3 jumpers

The jump is worth it when a 7-metre reach is needed without adding intermediate patch panels, or when an existing cable exceeds the 0.6 dB typical insertion loss at 850 nm. It does not suit single-mode runs, male-pinned trunk cables, or networks requiring OM4 or OM5 bandwidth headroom.

Highlights

  • Low insertion loss under 0.6 dB at 850 nm
  • Typical loss of 0.3 dB ensures efficient signal transmission
  • OM3 multimode fibre supports 10G and 40G networks
  • LSZH jacket reduces toxic smoke in fire situations
  • Type B polarity maps channel 1 to channel 12 for cassette links

Specifications

No published specifications for this item yet.

Other versions of this model

4 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 7 m LSZH cable include both MPO connectors, or do I need to buy them separately?

The cable ships with MPO female connectors on both ends, pinned for Type‑B (channel 1 to 12) wiring, so no separate connectors are required.

When should I choose this 8‑fibre OM3 Type‑B version instead of a 12‑fibre or Type‑A cable?

Pick this 8‑fibre Type‑B assembly when your QSFP+ or cassette ports use an 8‑core MPO interface and need the channel 1‑to‑12 flip for correct polarity.

What does the <0.6 dB insertion loss at 850 nm mean for a 40 G link?

Typical loss is only 0.3 dB per connector, so the total link budget stays well within OM3 40 G limits even with multiple patch panels.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.