We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black wall-plug power adapter with attached 5.5 x 2.1mm DC cable

BFKK

BFKK 24V 30W 1.25A power adapter

SKU CH-6JGP-FFSXW

Delivers 24 V DC at up to 1.25 A from any 100-240 V AC outlet, with UL-listed protection and a 5.5 × 2.1 mm plug for LED strips and other low-power 24 V devices

Style 30W Power

  • Delivers stable 24 V DC at up to 30 W for LED strips
  • Wide 100-240 V AC input handles 50/60 Hz mains worldwide
  • cUL-listed protection against overcurrent, short circuit, overvoltage and overheat
  • IP30 rated for dry indoor use with 1-3 second soft-start
  • Plug-and-play with 5.5 × 2.1 mm DC jack (positive tip) included

24 V 30 W power adapter for LED strips

This 24 V DC adapter delivers up to 30 W and 1.25 A for indoor LED strip lights, modules, light bars and similar low-power 24 V devices. It accepts 100 to 240 V AC at 50 or 60 Hz and includes a 5.5 x 2.1 mm DC jack with positive tip. The unit is cUL listed and rated IP30 for dry indoor use only.

Check voltage and wattage before ordering

Confirm that your equipment runs on 24 V DC and draws less than 30 W to prevent flickering or overheating. The adapter has no built-in dimming or charging function; add an external PWM controller at the DC end if dimming is required. Ensure the installation location is a dry indoor environment matching the IP30 rating.

cUL listed protection and plug-and-play convenience

Overcurrent, short-circuit, overvoltage and overheat safeguards protect connected gear, and the supplier backs the adapter with a three-year service period. Start-up takes one to three seconds to stabilise output and extend service life. Direct wall-outlet insertion requires no hardwiring or soldering.

Highlights

  • Delivers stable 24 V DC at up to 30 W for LED strips
  • Wide 100-240 V AC input handles 50/60 Hz mains worldwide
  • cUL-listed protection against overcurrent, short circuit, overvoltage and overheat
  • IP30 rated for dry indoor use with 1-3 second soft-start
  • Plug-and-play with 5.5 × 2.1 mm DC jack (positive tip) included

Specifications

No published specifications for this item yet.

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What comes in the box and is any extra cable or connector needed?

The adapter includes an output cable terminated with a 5.5 x 2.1 mm DC jack (positive tip) for direct connection to LED strips or other 24 V devices. No additional cable or soldering is required.

How do I know if the 30 W 1.25 A version is the right one for my LED strip?

Check that your strip is rated for 24 V and draws less than 30 W total; this unit supplies up to 1.25 A at 24 V, so any load within that limit will work.

What does the 30 W rating mean once the adapter is powering my lights?

It delivers a constant 24 V DC up to 1.25 A, with start-up stabilisation in 1–3 seconds and protection against overcurrent, short circuit, overvoltage and overheating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.