We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular power adapter with 5.5x2.1mm DC jack cable

BFKK

BFKK 24V 30W Power Adapter 100-240V AC 50/60Hz 5.5x2.1mm DC Jack

SKU CH-4GM2-VWSFN

Converts 100-240V AC input to 24V DC at 30W with a 5.5x2.1mm jack for LED strips and 24V devices

Style 120W Power

  • Delivers stable 24 V DC output up to 30 W for reliable device operation
  • Accepts 100-240 V AC at 50/60 Hz for worldwide mains compatibility
  • cUL listed with overcurrent, short-circuit, overvoltage and overheat protection for safe use
  • Ready to use with 5.5 x 2.1 mm DC jack — no soldering or hardwiring required
  • IP30 rated for dry indoor environments such as LED strips, routers and cameras

24V 30W Power Adapter

This 24-volt DC power adapter delivers up to 30 watts from a 100-240V AC supply at 50 or 60 Hz. It suits indoor devices that draw no more than 1.25 A at 24 V, such as LED strips, small 3D printers, wireless routers or security cameras. The unit is UL listed and includes overcurrent, short-circuit, overvoltage and overheat protection. It is not for equipment that needs more than 30 W or that requires dimming or charging functions.

Capacity and headroom

The adapter provides a constant 24 V output at a maximum of 1.25 A, giving 30 W of headroom for compatible loads. It handles LED lighting, routers and similar 24 V gear comfortably within that limit. Start-up takes one to three seconds while the output stabilises. Devices drawing above 30 W or needing a different voltage will not operate correctly with this unit.

Build and connectors

Rated IP30, the adapter is intended for dry indoor use only. It plugs directly into a wall outlet with no hardwiring or soldering required. A fixed output cable terminates in a 5.5 x 2.1 mm DC jack with positive tip polarity for quick connection. The cUL-listed protection suite guards connected hardware against common electrical faults.

Highlights

  • Delivers stable 24 V DC output up to 30 W for reliable device operation
  • Accepts 100-240 V AC at 50/60 Hz for worldwide mains compatibility
  • cUL listed with overcurrent, short-circuit, overvoltage and overheat protection for safe use
  • Ready to use with 5.5 x 2.1 mm DC jack — no soldering or hardwiring required
  • IP30 rated for dry indoor environments such as LED strips, routers and cameras

Specifications

No published specifications for this item yet.

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 5.5 x 2.1 mm DC jack on this 24 V 30 W adapter fit the barrel plug on my existing LED strip?

The adapter terminates in a standard 5.5 x 2.1 mm DC jack with positive tip, so it matches any strip or device using that same barrel size and polarity.

How can I confirm the 24 V 30 W unit is delivering stable power once I plug it in?

The supply needs 1 to 3 seconds at start-up to stabilise its 24 V DC output; after that delay the connected device should run without flicker or overheating.

Does the box include a mains lead or only the 5.5 x 2.1 mm output cable?

The adapter plugs directly into a wall outlet, so no separate mains lead is required; the output cable with the 5.5 x 2.1 mm DC jack is included.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.