We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two compact black boxes with dual antennas and HDMI ports side by side

Avantalk

Avantalk DT263W Pro A/V Extender & Repeater 500m 1080p 5.8GHz

SKU CH-D1G5-4FZ2C

Wirelessly extends 1080p HDMI up to 500m with 0.1s latency and supports up to six receivers

  • Wireless 1080p streaming up to 500 metres open field
  • Dual-band 2.4 and 5.8 GHz antennas for strong signal
  • 4K input decoding with 1080p 60 Hz output
  • Low 0.1 second latency for live gaming and sports
  • Plug-and-play setup with HDMI loop-out on transmitter

Wireless HDMI Extender for Live Video

The Avantalk DT263W Pro A/V Extender & Repeater transmits 1080p signals up to 500m in open areas. It suits camera operators, streamers and installers who need to place a display or projector far from the source without running long cables.

Plug-and-Play Setup with Loop Out

Connect the transmitter to an HDMI source and the receiver to a TV or projector; no software installation is required. The transmitter includes a local HDMI loop out for a confidence monitor. Walls, bricks or glass can shorten range or cause severe signal loss, so plan a clear line of sight.

Sustained 1080p 60Hz with Low Latency

The link delivers Full HD 1080p at 60Hz continuously with a latency of .1s, keeping video and audio smooth during extended sessions. Dual antennas operate on 2.4 and 5.8GHz bands for stable throughput. The system supports up to six receivers for multi-room distribution.

Highlights

  • Wireless 1080p streaming up to 500 metres open field
  • Dual-band 2.4 and 5.8 GHz antennas for strong signal
  • 4K input decoding with 1080p 60 Hz output
  • Low 0.1 second latency for live gaming and sports
  • Plug-and-play setup with HDMI loop-out on transmitter

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the DT263W Pro is transmitting at 1080p 60Hz with .1s latency after setup?

Connect the transmitter to your source and receiver to the display, then verify the output shows 1080p at 60Hz; the .1s latency is noticeable during real-time gaming or live sports with no perceptible delay.

What comes in the box and what extra items are needed to run a single transmitter with up to 6 receivers?

The kit includes one transmitter with HDMI loop-out and one receiver; add up to five extra receivers for multi-room use — each receiver needs its own HDMI cable and power adapter.

Should I choose the 2.4GHz or 5.8GHz band for a 500m open-field link through walls?

Use 5.8GHz for maximum 500m range in clear line of sight; 2.4GHz penetrates walls and brick better but with reduced distance and more interference risk.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.