MuxLab
MuxLab 500040 VGA repeater 800x600 350ft
Transmits VGA video up to 800 x 600 resolution over Cat 5e or Cat 6 cable to 350 feet using a paired balun
- Extends VGA signals up to 350 feet over Cat 5e/6 cable
- Supports 800x600 resolution for clear video transmission
- Replaces costly coaxial or VGA cabling with affordable UTP
- Requires monitor-side balun sold separately for complete link
VGA over Cat 5e/6 extension
The MuxLab 500040 is a PC-side VGA balun that converts a standard VGA signal for transmission over affordable UTP Cat 5e or Cat 6 cable. It supports resolutions up to 800x600 at distances up to 350 feet. A matching monitor-side balun is required at the display end and is sold separately.
Installers needing long cable runs
This extender suits installers who need to bridge long distances between a PC and a display without the cost or bulk of traditional VGA or coaxial cabling. It does not serve users who require higher resolutions such as 1080p or above. Buyers who want a single-box solution without purchasing a second balun should look at a different device.
Highlights
- Extends VGA signals up to 350 feet over Cat 5e/6 cable
- Supports 800x600 resolution for clear video transmission
- Replaces costly coaxial or VGA cabling with affordable UTP
- Requires monitor-side balun sold separately for complete link
Specifications
| Brand | MuxLab |
|---|---|
| Shipping weight | 0.13 kg |
| Package size | 25 × 25 × 25 mm |
Questions about this item
What resolution does the 500040 support over its maximum 350 foot range?
The 500040 transmits 800x600 resolution signals up to 350 feet over cat 5e/6 cable.
What cable and companion unit does the PC-side 500040 require for installation?
It requires UTP cat 5e/6 cable and a separate monitor-side balun to complete the link.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



