We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular video wall processor unit with front panel controls and rear HDMI ports

BFKK

BFKK 2x2 Video Wall Processor 180º Rotation TAA Compliant

SKU CH-TCCN-6G3EB

Splits one 4K HDMI signal across four screens in multiple layouts with 180º rotation, bezel adjustment and cascading up to 10x10 walls

  • Build a 2x2 video wall from one HDMI source
  • Accepts 4K input up to 4096x2160 at 60Hz 4:4:4
  • Outputs 1920x1200 or 1080p per display with bezel adjustment
  • Rotates 90º and flips 180º with tear-free synchronisation
  • Cascades multiple units to create up to a 10x10 video wall

2×2 Video Wall Processor

The BFKK Prophecy 2x2 Video Wall Processor builds a high-definition 2x2 video wall from a single HDMI source. It supports multiple configurable display modes including 1x1, 2x2, 1x2, 2x1, 1x3, 3x1, 1x4, and 4x1. A cascading function allows expansion up to a 10x10 video wall using multiple units. The device is TAA compliant for government procurement.

Rotation and OS Constraints

This processor suits installers needing 90º rotation, 180º flipping, bezel adjustment, and tear-free synchronization across displays. It accepts 4K input up to 3840x2160 or 4096x2160 at 60Hz 4:4:4 and outputs up to 1920x1200 per display. Software control is only available on Windows OS; macOS is not supported, so Mac-based environments should look elsewhere.

Control and Installation

Installation uses push buttons, an IR remote, USB, Ethernet, and Control4 integration for configuration. Saved and recalled image parameters simplify recurring layouts. The Windows-only software requirement is the most common oversight; buyers must ensure a Windows host is available for advanced setup. Firmware is upgradable for future compatibility.

Highlights

  • Build a 2x2 video wall from one HDMI source
  • Accepts 4K input up to 4096x2160 at 60Hz 4:4:4
  • Outputs 1920x1200 or 1080p per display with bezel adjustment
  • Rotates 90º and flips 180º with tear-free synchronisation
  • Cascades multiple units to create up to a 10x10 video wall

Specifications

No published specifications for this item yet.

Questions about this item

What display resolution and HDMI input does the 2x2 video wall processor need from my source to run at 60Hz?

Feed it an HDMI signal up to 3840x2160 or 4096x2160 at 60Hz 4:4:4; each of the four outputs then delivers up to 1920x1200 or 1080p to the attached screens.

Will the processor pass a 4K 60Hz signal through to older 1080p monitors in a mixed wall?

Yes. The unit accepts 4K 60Hz on the input and down-scales each output independently to 1920x1200 or 1080p, so legacy panels work alongside newer ones.

How can I confirm the four screens are synchronised and bezel-corrected after setup?

Use the Windows control software, USB, Ethernet, IR remote or front-panel buttons to load a test pattern; verify tear-free playback, matched 90º or 180º rotation, and aligned edges across all displays.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.