ATS Cables Cat6 Plenum 1000ft 550MHz 23AWG Purple network ethernet cable

Plenum-rated Cat6 for air-handling spaces

This 1000 ft bulk cable meets CMP fire-safety requirements for installation in plenum ceilings and raised floors. The low-smoke, non-toxic jacket suits commercial buildings where building codes mandate plenum-rated materials. Solid 23 AWG conductors support Fast, Gigabit and 10-Gigabit Ethernet over long runs. Sequential foot markings simplify measurement during pulls.

Bandwidth ceiling at 550 MHz

The Cat6 UTP construction is tested to 550 MHz, which defines the practical frequency limit for this cable. CCA conductors provide a cost-effective alternative to solid copper but do not meet the conductivity required for Power over Ethernet or the strictest TIA/EIA 568-C.2 channel limits. Unshielded twisted pairs rely on the internal spline to control crosstalk rather than external shielding.

1000 ft pull box with measured headroom

The easy-pull box dispenses the full 1000 ft without tangles, and the foot markers let installers cut exact lengths for each drop. At 550 MHz the cable comfortably handles Gigabit links at the full 100 m channel distance; 10-Gigabit operation is limited to shorter runs because the CCA conductors and unshielded design increase insertion loss. Buyers who need PoE support or full 100 m 10G performance should specify solid-copper, shielded alternatives.