We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

ASUS

ASUS RS720-E11-RS12U-16W10G 2U barebone server

SKU CH-K6F1-RN1N7 MPN RS720-E11-RS12U-16W10G

2U rackmount barebone supports dual Xeon Scalable CPUs, 32 DDR5 slots, twelve hot-swap bays and dual 10 GbE with 1600 W redundant power

  • Form Factor2U Rackmount
  • WorkloadGeneral Purpose Server
  • CPU TypeIntel Xeon Processor Scalable Family
  • CPU SocketLGA 4677
  • Installed CPUNo CPU Installed
  • North BridgeIntel C741
  • Supports Intel Xeon Scalable processors via LGA 4677 socket
  • 32 DDR5 288-pin slots for high-capacity memory
  • 12 hot-swap 3.5"/2.5" bays plus 2 M.2 slots
  • Dual 10GbE LAN and OCP 3.0 for fast networking
  • 1600W 1+1 redundant 80 Plus Platinum power supply

2U Rackmount Barebone for Xeon Scalable

This 2U rackmount barebone accepts Intel Xeon Scalable Family processors in an LGA 4677 socket with Intel C741 chipset. It ships without CPU or memory installed, leaving configuration entirely to the builder. Dual 1600 W redundant power supplies rated 80 Plus Platinum provide high-efficiency power delivery for dense deployments.

Suits integrators building custom general-purpose

Organisations that need a chassis ready for dual-socket Xeon Scalable CPUs, up to 32 DDR5 DIMMs and twelve hot-swap drive bays will match this platform. Buyers who require pre-installed processors, memory or storage should look elsewhere, as the unit arrives unpopulated. Environments without 10 GbE networking infrastructure will not use the onboard dual-port controller.

Sustained load behaviour

Under continuous operation the 1+1 redundant 1600 W Platinum units share load, maintaining efficiency and allowing one module to fail without downtime. The twelve hot-swap bays support NVMe, SAS (with add-in card) or SATA drives for persistent I/O. Nine PCIe Gen5 expansion slots — including OCP 3.0 — accommodate long-running accelerator or networking cards without thermal throttling in a properly cooled rack.

Highlights

  • Supports Intel Xeon Scalable processors via LGA 4677 socket
  • 32 DDR5 288-pin slots for high-capacity memory
  • 12 hot-swap 3.5"/2.5" bays plus 2 M.2 slots
  • Dual 10GbE LAN and OCP 3.0 for fast networking
  • 1600W 1+1 redundant 80 Plus Platinum power supply

Specifications

BrandASUS
ModelRS720-E11-RS12U-16W10G
Form Factor2U Rackmount
WorkloadGeneral Purpose Server
CPU TypeIntel Xeon Processor Scalable Family
CPU SocketLGA 4677
Installed CPUNo CPU Installed
North BridgeIntel C741
Memory Slots32 x 288Pin
Installed Memory SizeNo Memory Installed
Memory Type SupportedDDR5 4800(1DPC)/4400(2DPC)
Installed HDDNo Storage Installed
Serial ATA8 x NVMe/SAS*/SATA + 4 NVMe/SATA
(*HBA/RAID card is required to support SAS hard drives)
M.22
PCI ExpressUp to 9 slots
6 x PCIe G5 x8 link or 3 x PCIe G5 x16 link (FHFL or FHHL)
1 x PCIe G5 x16 link (FHHL)
1 x OCP 3.0/PCIe Gen5 x16 link (FHHL)
1 x PCIe G5 x16, LP
First LANIntel I710-AT2
Max. LAN Speed10 Gigabit
3.5" Bays12 x 3.5”/2.5" hot-swap bay
Front USB2 x USB 3.2 Gen1
VGA1 x VGA (Rear)
Rear USB2 x USB 3.2 Gen1
RJ452 x 10GbE LAN ports (RJ45)
Other Ports1 x RJ-45 Management LAN port
Max. Power1600W Redundant 1+1, 80 Plus Platinum
Dimensions33.07" x 17.6" x 3.46"
Weight63.61 lbs.
Shipping weight25.86 kg
Package size1113 × 595 × 380 mm

Questions about this item

Which CPUs and memory modules must I supply to complete this barebone server?

You need Intel Xeon Scalable Family processors for the LGA 4677 sockets and DDR5 4800 (1DPC) or 4400 (2DPC) RDIMMs for the 32 x 288-pin slots.

Can I keep my existing SAS drives and 10 GbE network gear when I deploy this system?

Yes, the 12 hot-swap bays accept SAS drives when an HBA or RAID card is added, and the dual 10GbE RJ45 ports connect directly to your current 10 GbE infrastructure.

How do I confirm the redundant power supply and 10 GbE links are operating correctly after assembly?

Check the front-panel LEDs for dual PSU status, verify both 10GbE RJ45 ports show link lights, and review the management LAN port for BMC health alerts.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.