ASRock Rack
ASRock Rack 2U12L-ICX2 barebone server 12×3.5″/2.5″ 16+16 DIMM 1600W CRPS
A 2U rackmount barebone with twelve hot-swap drive bays, thirty-two DDR4 slots and dual 1600 W redundant power supplies
- Dual Socket P+ (LGA 4189) supports 3rd Gen Intel Xeon Scalable processors
- 16+16 DIMM slots support DDR4 RDIMM LRDIMM and Intel Optane Persistent Memory 200 series
- 12 hot-swap 3.5"/2.5" drive bays plus 2 fixed 2.5" SATA bays
- 3 FH PCIe4.0 x16 2 FH PCIe4.0 x8 and 2 low-profile PCIe4.0 x8 slots
- 1+1 1600W CRPS redundant power supply with 2 RJ45 1GbE and 1 OCP NIC 3.0
Dual-socket Xeon storage barebone
The ASRock Rack 2U12L-ICX2 is a 2U rackmount barebone built for dual Socket P+ (LGA 4189) processors. It supports 3rd Gen Intel Xeon Scalable CPUs and provides 12 hot-swap bays that accept 3.5 or 2.5 inch drives. Two fixed 2.5 inch SATA bays add internal boot or cache options. Redundant 1600W CRPS power supplies are included.
Storage-heavy workloads, not GPU farms
This platform suits buyers who need dense drive capacity and high memory bandwidth in a 2U form factor. The 16+16 DIMM layout supports DDR4 RDIMM, LRDIMM, 3DS modules and Intel Optane Persistent Memory 200 series. Builders who require multiple double-width accelerators or more than three full-height x16 PCIe 4.0 slots should look at a different chassis.
Steady throughput with redundant power
Under sustained load the dual 1600W CRPS units share current and maintain delivery if one module fails. Seven full-height PCIe 4.0 expansion slots plus two low-profile x8 slots keep I/O paths open for networking and storage controllers. Two M.2 sockets accept PCIe 3.0 x4 or SATA 6Gb/s devices. Dual 1GbE ports and an OCP NIC 3.0 slot handle baseline connectivity.
Highlights
- Dual Socket P+ (LGA 4189) supports 3rd Gen Intel Xeon Scalable processors
- 16+16 DIMM slots support DDR4 RDIMM LRDIMM and Intel Optane Persistent Memory 200 series
- 12 hot-swap 3.5"/2.5" drive bays plus 2 fixed 2.5" SATA bays
- 3 FH PCIe4.0 x16 2 FH PCIe4.0 x8 and 2 low-profile PCIe4.0 x8 slots
- 1+1 1600W CRPS redundant power supply with 2 RJ45 1GbE and 1 OCP NIC 3.0
Specifications
No published specifications for this item yet.
Questions about this item
Which processors must I already have to populate the dual Socket P+ (LGA 4189) on this barebone?
The system supports 3rd Gen Intel Xeon Scalable processors for the dual Socket P+ (LGA 4189) configuration.
Can I keep using my existing DDR4 RDIMM or LRDIMM modules in the 16+16 DIMM slots?
The board provides 16+16 DIMM slots that accept DDR4 RDIMM, LRDIMM and RDIMM/LRDIMM-3DS types.
How do I verify the 1600W CRPS redundant power supply is operating correctly after installation?
The 1+1 1600W CRPS units provide redundant power; both modules should show green status LEDs when functioning normally.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



