We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

ASRock Rack

ASRock Rack 1U4LW-C262/2L2T RPSU barebone server

SKU CH-MZRC-BZ8A3 MPN 1U4LW-C262/2L2T RPSU

1U rackmount barebones server with redundant 450 W platinum power, four hot-swap 3.5" SATA bays, two fixed 2.5" NVMe slots, and dual 10 GbE ports

  • Redundant 450W 80-PLUS Platinum power supply keeps system running if one unit fails
  • Single LGA 1700 socket supports Intel Xeon E-2400 series and Pentium Gold G7400 processors
  • Four DDR5 ECC UDIMM slots provide error-correcting memory for data integrity
  • Four hot-swap 3.5" SATA bays plus two fixed 2.5" PCIe 4.0 x4 NVMe bays offer flexible storage
  • Dual 10GbE RJ45 ports via Intel X710 plus FHHL PCIe 5.0 x16 slot enable high-speed expansion

1U rackmount server barebone with redundant power

This 1U rackmount barebone targets system integrators and IT departments building single-socket Intel Xeon E-2400 or Pentium Gold G7400 series servers. It ships with a 1+1 redundant 450 W power supply rated 80-PLUS Platinum and provides four hot-swap 3.5" SATA drive bays plus two fixed 2.5" NVMe bays for mixed storage configurations.

Storage capacity and expansion headroom

Four hot-swap 3.5" SATA bays deliver high-capacity bulk storage while two PCIe 4.0 x4 NVMe slots add low-latency performance tiers. A full-height half-length PCIe 5.0 x16 slot and an M.2 PCIe 4.0 x4 connector provide room for additional controllers or accelerators. The four DDR5 ECC UDIMM slots support registered ECC memory for data-integrity workloads.

Thermals noise and power in normal use

The redundant 450 W 80-PLUS Platinum power supply maintains high efficiency across typical server loads, reducing waste heat in dense rack rows. Dual 10 GbE ports handled by the Intel X710 controller add network throughput without extra add-in cards. The compact 1U chassis relies on internal airflow routing to cool the CPU, memory, drives and expansion cards within the supplied power envelope.

Highlights

  • Redundant 450W 80-PLUS Platinum power supply keeps system running if one unit fails
  • Single LGA 1700 socket supports Intel Xeon E-2400 series and Pentium Gold G7400 processors
  • Four DDR5 ECC UDIMM slots provide error-correcting memory for data integrity
  • Four hot-swap 3.5" SATA bays plus two fixed 2.5" PCIe 4.0 x4 NVMe bays offer flexible storage
  • Dual 10GbE RJ45 ports via Intel X710 plus FHHL PCIe 5.0 x16 slot enable high-speed expansion

Specifications

No published specifications for this item yet.

Questions about this item

Will my existing 3.5" SATA drives work in the four hot-swap bays?

Yes, the four front bays accept 3.5" SATA drives and support hot-swap operation.

How can I verify the 1+1 450W redundant power supply is active after installation?

Each power module has status LEDs; both should show green when the redundant supply is operating normally.

Are drive trays and mounting screws included for the 2.5" NVMe bays?

The barebone includes trays for the four 3.5" hot-swap bays; the two fixed 2.5" NVMe bays use direct mounting, so no extra trays are needed.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.