We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black UPS unit with ten front outlets and LCD display

APC

APC BR1000MS PDU 1000VA 10 Outlets Sinewave

SKU CH-QAYC-0PF2Z MPN BR1000MS

Delivers 1000VA sinewave output through 10 NEMA 5-15R outlets with 1080-joule surge protection and USB management

  • Sinewave output protects sensitive equipment
  • 10 NEMA 5-15R outlets distribute power
  • 1000VA capacity supports critical loads
  • 1080-joule surge rating guards against spikes
  • USB port enables management and monitoring

1000VA Sinewave UPS for desktop systems

The APC BR1000MS delivers 1000VA of pure sinewave output to protect desktop workstations, networking gear and NAS devices from power loss and voltage fluctuation. Ten NEMA 5-15R outlets provide battery-backed and surge-only sockets for mixed loads. A 1.83 metre cord and USB port simplify placement and management.

45 dB audible noise with sealed lead-acid battery

In normal operation the unit runs at 45 dB and maintains an operating temperature range of 0 to 40 degrees Celsius. The sealed lead-acid battery charges within the same envelope and supports automatic self-test cycles. Input voltage tolerance spans 88 to 147 volts at 60 Hz, while the 1080 joule surge rating guards connected equipment.

Replaces standby UPS units without sinewave output

Buyers moving from a standby topology gain clean sinewave power that prevents compatibility issues with active PFC power supplies. The step is worthwhile when attached loads require pure sinewave output or when audible alarms for low battery and overload conditions are needed. It does not suit buyers who need extended runtime beyond the internal battery or who require three-phase input.

Highlights

  • Sinewave output protects sensitive equipment
  • 10 NEMA 5-15R outlets distribute power
  • 1000VA capacity supports critical loads
  • 1080-joule surge rating guards against spikes
  • USB port enables management and monitoring

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the BR1000MS and what step do people often miss?

Plug the 1.83 m NEMA 5-15P cord into a 120 V 60 Hz wall outlet, then connect up to 10 devices to the NEMA 5-15R outlets. The step often missed is pressing the power button on the front panel to activate the inverter.

What maintenance or replacement will the BR1000MS need later?

The sealed lead-acid battery will need replacement, typically after 3 – 5 years. When the low-battery alarm sounds, order an APC RBC cartridge and swap it through the front battery door while the UPS stays online.

What limit shows up first under sustained heavy load on the BR1000MS?

The 12 A maximum input current trips the overload alarm before the 1000 VA rating is reached, so total connected draw must stay below 12 A at 120 V.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.