We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
APC AP7582 basic rack PDU 2U 30A 120V twelve 5-20 outlets

APC

APC AP7582 Basic Rack PDU 2U 30A 120V (12)5-20

SKU CH-N6TF-SP6RF

Basic 2U rack power distribution unit supplying 30 A at 120 V through twelve 5-20 outlets

  • Distributes power to twelve 5-20 outlets
  • Handles 30 A at 120 V for dense racks
  • 2U horizontal form factor fits standard enclosures
  • InfraStruXure Certified for managed infrastructure
  • Tool-less vertical mounting in NetShelter VX rear channel

APC Basic Rack PDU 2U 30A 120V

The APC AP7582 is a Basic Rack Power Distribution Unit designed to deliver 120 V power to rack-mounted equipment. It occupies 2U of horizontal rack space and provides twelve NEMA 5-20R outlets fed by a single 30 A input.

Suited for 120 V server racks needing dense outlet

This unit fits administrators who need twelve 20 A receptacles in a compact 2U form factor for 120 V environments. It is not intended for installations requiring metered or switched power management, higher input voltages, or vertical zero-U mounting without the NetShelter VX rear channel.

Twelve 5-20R outlets on a 30 A 120 V feed

The PDU comfortably powers up to twelve devices drawing up to 20 A each while the aggregate load stays within the 30 A supply rating. Headroom ends when combined draw approaches the 30 A limit, at which point the upstream breaker becomes the constraining factor.

Highlights

  • Distributes power to twelve 5-20 outlets
  • Handles 30 A at 120 V for dense racks
  • 2U horizontal form factor fits standard enclosures
  • InfraStruXure Certified for managed infrastructure
  • Tool-less vertical mounting in NetShelter VX rear channel

Specifications

BrandAPC
ModelAP7582

Questions about this item

What rack infrastructure is required to mount this 2U PDU without tools?

It mounts vertically in the rear channel of a NetShelter VX enclosure.

How does the 30 A, 120 V input connect to an existing facility circuit?

The unit draws up to 30 A at 120 V, so the branch circuit and breaker must support that rating.

How can I verify the PDU is delivering power to connected equipment after installation?

Check that each of the twelve 5-20R outlets shows voltage and that attached devices power on normally.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.