We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Aomoproing

Aomoproing SATA Power Y Splitter Cable 15 Pin Male to Dual Female 7 Inch 25 Pack

SKU CH-4T5J-ZZHKV

A 7-inch SATA power Y-splitter turns one 15-pin connector into two, using 18 AWG wire rated for 3.3 V, 5 V and 12 V, and the 25-pack supports multiple 2.5-inch SSDs, 3.5-inch drives or optical units

Pack 25 Packs

  • Turn one SATA power port into two connections
  • 7 inch length fits tight desktop cases
  • 18 AWG wire carries 3.3V 5V and 12V power
  • Supports 2.5 inch SSD 3.5 inch HDD and optical drives
  • 25 pack supplies enough splitters for multi-drive builds

Purpose and fit

This 25-pack of SATA power Y-splitter cables turns a single 15-pin connector into two, letting builders add extra drives when the PSU runs short of native ports. It suits system integrators, repair technicians and enthusiasts who need many short adapters for 2.5-inch SSDs, 3.5-inch hard drives or optical drives in desktop towers.

Sustained-load behaviour

Each cable uses 18 AWG conductors rated for the 3.3 V, 5 V and 12 V rails, so the copper cross-section is fixed regardless of how many splitters are daisied off one rail. The 7-inch length keeps voltage drop low, but total current draw must stay within the power supply’s own SATA rail limit; the splitter itself adds no regulation or protection.

Installation notes

The male plug and dual female receptacles are keyed, so orientation is obvious and no tools are required. Common issues arise when builders exceed the PSU’s SATA rail amperage or route the short cables where they block airflow; always verify the supply’s rating before connecting multiple high-spin-up drives.

Highlights

  • Turn one SATA power port into two connections
  • 7 inch length fits tight desktop cases
  • 18 AWG wire carries 3.3V 5V and 12V power
  • Supports 2.5 inch SSD 3.5 inch HDD and optical drives
  • 25 pack supplies enough splitters for multi-drive builds

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 18 AWG wire on this Y-splitter get hot when both drives run all day?

The 18 AWG conductors carry 3.3 V, 5 V and 12 V lines; they stay cool under normal SSD or hard-drive loads as long as the power supply has headroom for the extra devices.

What must my power supply already have to use these splitters?

You need at least one free 15-pin SATA power connector on the PSU; each splitter turns that single port into two female ports.

Will the 7-inch length reach a 3.5-inch drive mounted in a lower bay?

At 20 cm the cable is short; it works best when the power supply and drive bays are close together in the same tower section.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.