We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pack of five SATA power Y-splitter cables, 15-pin male to dual female, 7 inch black wires

Aomoproing

Aomoproing SATA Power Y Splitter Cable 15 Pin Male to Dual Female 7 Inch 5 Pack

SKU CH-QBXW-58TDJ

Adds two SATA power connectors from one 15-pin port, 7-inch 18 AWG cables support 3.3V, 5V and 12V for SSDs, HDDs and optical drives

Pack 5 packs

  • Turn one SATA power port into two connections
  • 7 inch cable length suits compact builds
  • 18 AWG wire handles 3.3V 5V and 12V lines
  • Powers 2.5 inch SSD 3.5 inch HDD and optical drives
  • Five cables included for multiple device upgrades

Power Port Expansion

This SATA power Y splitter turns one 15 pin SATA power port into two female ports, letting you add a second 2.5 inch SSD, 3.5 inch hard drive or optical drive when the power supply has limited connectors. It is aimed at desktop builders and upgraders who need extra SATA power outlets without replacing the PSU. The 7 inch length keeps cable routing tidy inside standard tower cases.

Simple Plug-In Install

Installation is a direct plug-in: connect the 15 pin male end to the PSU SATA cable and attach each female end to the drive power inputs. The 18 AWG wire gauge handles the 3.3V, 5V and 12V rails supplied by the PSU. The main risk is exceeding the PSU’s total current capacity when multiple drives spin up simultaneously, so confirm the unit can deliver the extra load.

Check PSU Headroom First

Before ordering, verify that your power supply has enough spare wattage on the 12V, 5V and 3.3V rails for the additional devices you plan to attach. Ensure the existing SATA power cable reaches the intended drive locations with the 7 inch splitter in line. The cable is designed for internal SATA devices only and does not support eSATA or other interfaces.

Highlights

  • Turn one SATA power port into two connections
  • 7 inch cable length suits compact builds
  • 18 AWG wire handles 3.3V 5V and 12V lines
  • Powers 2.5 inch SSD 3.5 inch HDD and optical drives
  • Five cables included for multiple device upgrades

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How can I verify the 15-pin SATA power splitter is delivering 3.3V, 5V and 12V to both connected drives after installation?

Use a multimeter to measure voltage on each 15-pin female connector while the system is running; all three rails should read within spec for both outputs.

What comes in the 5-pack and do I need any extra cables or adapters to connect 2.5 inch SSDs or 3.5 inch hard drives?

The pack contains five 7-inch 15-pin male-to-dual-female Y cables with 18 AWG wire; no extra adapters are required for standard SATA drives.

When should I choose the 7-inch 18 AWG version over a longer or thicker-gauge splitter for my build?

Select this 7-inch 18 AWG cable when the power supply SATA ports are close to the drives and the total current draw stays within the PSU rating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.